Showing 33–48 of 66 results
With 80 watts of output from mono-crystalline cells, the Bixpy SUN80 Waterproof Solar Panel will charge your Bixpy PP-378 Battery or Bixpy PP-333 Battery in about 6 to 10 hours.
Plenty of Power Banks on the market can charge your phone, tablet, and even your headlamp. But most don’t have high 12V output for running air pumps, boilers, or even fridges. None are truly designed for outdoor use, none are truly waterproof and none are in hard aluminum casings and offer a 10-year lifespan!
The PP-77-AP provides you with one Super-Fast smart built-in USB outlet and one high-output 12V output.
Tired of replacing your SLA battery every season? The PP-77 LW is a compact high output 6V power bank designed to replace your old SLA batteries in any application.
No Drilling. No Hassle. The Low Profile – THRUHULL™ PEDAL DRIVE ADAPTER (J-2 Motors) clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power.
Now fits more kayaks including:
The DIY (Do It Yourself) ThruHull POD Adapter is the perfect DIY Adapter for the do it yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.
Click here to download a printable template for installing the Pod Adpater.
Please note: Pods in pictures shown are for illustration purposes only and not included.
* Pods and Motors shown in pictures not included in the Adapter Kits. If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.
For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.
This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com
INSTALLATION GUIDES
Click here for installation guides and videos
* Motors shown in pictures not included in the Adapter Kits
If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.
For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.
This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com
INSTALLATION GUIDES
Click here for installation guides and videos
* Motors shown in pictures not included in the Adapter Kits
If your paddle board or kayak has a Flip and Lock Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.
If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Flip & Lock fin, this is what you’ll need.
Protection: Water-proof, dirt-proof and corrosion resistant components
INSTALLATION GUIDES
If your paddle board or kayak has a Slide & Lock (sometimes called a Standard Fin Plate), this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.
If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Slide & Lock fin, this is what you’ll need.
Protection: Water-proof, dirt-proof and corrosion resistant components
Click Here for installation and video guides
* Motors in pictures not included
If your paddle board or kayak has a US Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.
If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a new US SUP fin, this is what you’ll need.
Make sure that you are getting the right Bixpy fin for your fin box by visting our Contact page or via our Online Chat.
Protection: Water-proof, dirt-proof and corrosion resistant components
Water use: Marine grade stainless steel components for salt water or fresh water use
No holes, no kayak modifications and simple Plug and Play installation!
The Hobie Twist and Stow Rudder Adapter replaces your Hobie rudder with a Bixpy Rudder and enable you to attach your J-2 Motor to your kayak’s rudder assembly. Steering is done using your Hobie steering system.
Click here for installation guides and videos
* Please note, this rudder adapter is ONLY compatible with Hobie Twist and Stow rudders. That includes: Hobie Sport Kayaks, Hobie Revolution Kayaks, Hobie Outbacks (pre 2019) and Hobie Oasis Kayaks.
** Not recommended on Inflatable Hobie Kayaks and this adapter won’t fit Hobie Pro Angler, Passport, Compass, 2019+ Outbacks and Island Series kayaks.
† This adapter blade will NOT work with J-1 Motors
Motors and batteries in pictures not include in adapter price. Some pictures may have other models illustrated.
If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
No Drilling. No holes. No hassle!
The ThruHull Pod Adapter for Bonafide Kayaks clips into the Dry Pod opening of your Bonafide kayak in seconds.
The adapter comes with the original Bonafide Dry Pod, allowing you to store and quickly access your gear or personal items.
The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the Dry Pod and can continue to use it for its intended purpose as you motor in your Bonafide kayak.
This adapter also features a motor shield that protects the motor in case of a light impact.
Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.
Click here for installation guides and videos.
If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
No Drilling. No holes. No hassle!
The ThruHul Pod Adapter for Feelfree Kayaks clips into the pod opening of your Feelfree kayak in seconds.
The adapter comes with the original Feelfree pod, allowing you to store and quickly access your gear or personal items.
The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the pod and can continue to use it for its intended purpose as you motor in your FeelFree kayak.
This ThruHul Pod Adapter for Feelfree Kayaks also features a motor shield that protects the motor in case of a light impact.
Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.
Click here for installation guides and videos.
If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
This rugged accessory is the ultimate DIY Steering Bracket. Depending on your installation and setup, you may need to move your steering wing up or down along the motor shaft.
The Adjustable V-ARM™ Steering Bracket gives you full range of motion and adjusts to provide responsive and fine tuned steering.
You can install this adapter with the steering eyelets pointed up or down for more adjustability.
The center hole is designed specifically for the Bixpy J-2 Motor shafts with a 1″ outside diameter.
The Bixpy Pole Steering Bracket can be used with any of the Bixpy Adapters that offer a 1″ vertical pipe (the blue pipes).
The Kare Kit for the Bixpy J-2 Motor is the ideal emergency kit to always have on board.
It includes the Fine Grill Bixpy Propeller Guard, a spare propeller, a CR2032 Battery battery cell for your remote and a 5ml tube of multi-purpose di-electric grease to protect your connector.
Click here for installation of the Propeller Guard Grill
Click here to best practices on mating your connectors
* Propellers may be blue or charcoal gray depending on our inventory – both propellers are made of exactly the same material
The Bixpy DIY Pod Adapter is for the do it yourselfer looking to install the Bixpy Jet on a Dry Pod or to the flat surface of virtually anything.
End of content
End of content
No products in the cart.
