The Hoodoo Pedal Drive Adapter allows you to quickly add a Bixpy Motor to your Hoodoo Voyager 100P and Hoodoo Tempest 120P.
No drilling. No hassle. This simple swap of your foot pedal drive with your Bixpy Hoodoo Pedal Drive adapter allows you to take your kayaking to the next level with clean electric power.
* Motors shown in the pictures above are not included in the adapter kit
The DIY (Do It Yourself) ThruHull™ POD Adapter is the perfect DIY Adapter for the do-it-yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.
Click here to download a printable template for installing the Pod Adapter.
Make sure that you are getting the right Bixpy adapter for your watercraft, contact us if you’re not sure.
* Pods and motors in the pictures above are not included in the adapter kit
The Power Pole WillFit™ Adapter allows you to quickly and easily add a Bixpy Motor to your kayak using your standard Micro Power Pole adapter slot.
If your kayak accommodates a Micro Anchor Power Pole, you can simply screw this adapter onto your Power Pole in seconds – no tools required!
If your kayak is Power Pole ready, but requires a special mounting plate (i.e. some Hobie Pro Anglers, Wilderness Atak, Native Propel, etc.) you will need that mounting plate from your kayak manufacturer to make installation easier.
If your kayak does not have a power pole mount, this is still an excellent, stable option for mounting a Bixpy Motor to your kayak as long as you have a fairly flat area in the rear of your kayak to accommodate the adapter’s foot print.  If you’re not sure, you can download the adapter’s outline by clicking here and trying it on your kayak.
NOTE: Pole Steering as shown in some of the pictures is NOT included in this adapter kit and can be purchased separately.Â
FEATURES
Quick release for getting on and off the water quickly
Hinge that allows the motor to lift completely out of the water
9.5″ to 14.5″ from bottom of plate to bottom of motor – it is recommended that the bottom of your motor be about 3″ to 5″ below the waterline and more in choppy water as necessary
270° of rotational trim – adapter ships with set screws in place. To achieve steering, set screws must be removed.
INCLUDES
Bixpy Power Pole Adapter
All hardware required to attach to Power Pole ready kayaks
Pole Steering Adapter Adapter illustrated NOT included and sold separately
ADDITIONAL INFORMATION
Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for saltwater or fresh water use
With the Universal Kayak Adapter, you can attach your Bixpy J-2 Motor to virtually any kayak, canoe or small watercraft. The aluminum pipes will adjust to accommodate virtually any length and configuration, and the mechanism includes an ingenious adjustment arm to accommodate a wide variety of slopes in the back of various watercraft.Â
As every kayak is slightly different in shape and configuration, you will have to do a little bit of installation with this adapter, but rest assured, this adapter ships complete with all the nuts and bolts you’ll need to get the job done. This is a more complex adapter, requiring higher levels of DIY ability, so it’s only recommended if none of our other Adapters fit your kayak and you’re comfortable taking on the task of installation or have access to a professional installer.Â
INCLUDES
Universal Kayak & Canoe Adapter
All hardware required to attach to kayaks and canoes
ADDITIONAL INFORMATION
Adapter: Attaches to virtually any kayak or canoe with adjustable hardware
Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for salt water or fresh water use
No drilling. No holes. No hassle! The ThruHull Pod Adapter for Feelfree Kayaks clips into the pod opening of your Feelfree kayak in seconds.
The adapter comes with the original Feelfree pod, allowing you to store and quickly access your gear or personal items.
The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the pod and can continue to use it for its intended purpose as you motor in your FeelFree kayak.
This ThruHull Pod Adapter for Feelfree Kayaks also features a motor shield that protects the motor in case of a light impact.
Make sure that you are getting the right Bixpy adapter for your watercraft by contacting us!
Please note: Installation of a motor on the pod will not leave enough space for installing a transducer as intended.
*Motors shown in pictures are not included in the Adapter Kits.
The QuickConnect Foot Steering Mounting & Control Kit is a custom-designed kit for mounting, steering, and retracting the Bixpy Motor on the NuCanoe Frontier 12 or the NuCanoe UNLIMITED. Take control with the QuickConnect Foot Steering Mounting and Control kit. Installs in seconds and lets you have full control over your propulsion with a flick of your foot. Hands-free kayaking is now a reality!
If your paddle board or kayak has a US Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.
If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a new US SUP fin, this is what you’ll need.
Make sure that you are getting the right Bixpy fin for your fin box by visting our Contact page or via our Online Chat.
INCLUDES
Bixpy US SUP Fin
All stainless steel hardware required to attach the fin to your fin box
ADDITIONAL INFORMATION
Protection: Water-proof, dirt-proof and corrosion resistant components
Water use: Marine grade stainless steel components for salt water or fresh water use
* Motors in pictures not included. If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
The ThruHull Pod Adapter for Bonafide Kayaks clips into the Dry Pod opening of your Bonafide kayak in seconds.
The adapter comes with the original Bonafide Dry Pod, allowing you to store and quickly access your gear or personal items.
The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the Dry Pod and can continue to use it for its intended purpose as you motor in your Bonafide kayak.
This adapter also features a motor shield that protects the motor in case of a light impact.
Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.
FEATURES
Quick and easy installation
Works with SS107 & SS127
Sealed to keep the pod dry
Weighs less than 4lbs
Original Bonafide Dry Pod
INCLUDES
ThruHull Pod Adapter for Bonafide Kayaks
Bixpy Propeller Housing with reduced width for a better fit
ADDITIONAL INFORMATION
Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for salt water or fresh water use