“Hobie Twist and Stow Rudder Adapter (K-1 & J-2 Motors)” has been added to your cart.
View cart
Showing 305–320 of 328 results
-
$35.00
PRODUCT DESCRIPTION
If your paddle board or kayak has a US Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.
If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a new US SUP fin, this is what you’ll need.
Make sure that you are getting the right Bixpy fin for your fin box by visting our Contact page or via our Online Chat.
INCLUDES
- Bixpy US SUP Fin
- All stainless steel hardware required to attach the fin to your fin box
ADDITIONAL INFORMATION
Protection: Water-proof, dirt-proof and corrosion resistant components
Water use: Marine grade stainless steel components for salt water or fresh water use
-
$66.99
The RAILBLAZA Camera Boom 600 R-Lock is the best action camera mount for your kayak, canoe, bass boat, yacht, sailboat, inflatable, motorcycle and/or other vessels. It certainly makes capturing those wide shots a breeze while you’re out on the water.
-
$32.99
Finally, a fish measurement board specialized for anglers in tight spaces. With limited space in the cockpit of a kayak, on the deck of a paddleboard, or in a gear bag when wade or bank fishing, The Fish Stik gives you back your fishing space by folding down and storing easily.
-
$14.95
The Fish Grip is the perfect fish landing tool for fishermen of all kinds. The unique jaw design holds the lip of the fish without harming the fish and the wrist lanyard always keeps it close at hand.
-
$69.00
PRODUCT DESCRIPTION
No holes, no kayak modifications and simple Plug and Play installation!
The Hobie Twist and Stow Rudder Adapter replaces your Hobie rudder with a Bixpy Rudder and enable you to attach your J-2 Motor to your kayak’s rudder assembly. Steering is done using your Hobie steering system.
INCLUDES
- Hobie Twist and Stow Rudder blade
- All hardware required will be on your existing Hobie Rudder
ADDITIONAL INFORMATION
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
INSTALLATION GUIDES
Click here for installation guides and videos
* Please note, this rudder adapter is ONLY compatible with Hobie Twist and Stow rudders. That includes: Hobie Sport Kayaks, Hobie Revolution Kayaks, Hobie Outbacks (pre 2019) and Hobie Oasis Kayaks.
** Not recommended on Inflatable Hobie Kayaks and this adapter won’t fit Hobie Pro Angler, Passport, Compass, 2019+ Outbacks and Island Series kayaks.
† This adapter blade will NOT work with J-1 Motors
Motors and batteries in pictures not include in adapter price. Some pictures may have other models illustrated.
If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
-
$249.00
PRODUCT DESCRIPTION
No Drilling. No holes. No hassle!
The ThruHull Pod Adapter for Bonafide Kayaks clips into the Dry Pod opening of your Bonafide kayak in seconds.
The adapter comes with the original Bonafide Dry Pod, allowing you to store and quickly access your gear or personal items.
The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the Dry Pod and can continue to use it for its intended purpose as you motor in your Bonafide kayak.
This adapter also features a motor shield that protects the motor in case of a light impact.
Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.
FEATURES
- Quick and easy installation
- Works with SS107 & SS127
- Sealed to keep the pod dry
- Weighs less than 4lbs
- Original Bonafide Dry Pod
INCLUDES
- ThruHull Pod Adapter for Bonafide Kayaks
- Bixpy Propeller Housing with reduced width for a better fit
ADDITIONAL INFORMATION
- Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Marine grade stainless steel components for salt water or fresh water use
INSTALLATION GUIDES
Click here for installation guides and videos.
If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
-
$44.99
With the Vibe Sea Ghost Deck Pad Kit, your kayak will look slick, without the slip. The 5mm EVA material provides exceptional traction either wet or dry, and the sweet design adds flair to your already awesome kayak. The marine grade peel and stick adhesive makes for a quick and easy installation. This kit was designed to fit both the Sea Ghost 110 and Sea Ghost 130.
-
$249.00
PRODUCT DESCRIPTION
No Drilling. No holes. No hassle!
The ThruHul Pod Adapter for Feelfree Kayaks clips into the pod opening of your Feelfree kayak in seconds.
The adapter comes with the original Feelfree pod, allowing you to store and quickly access your gear or personal items.
The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the pod and can continue to use it for its intended purpose as you motor in your FeelFree kayak.
This ThruHul Pod Adapter for Feelfree Kayaks also features a motor shield that protects the motor in case of a light impact.
Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.
FEATURES
- Quick and easy installation
- Works with FeelFree Lure, Moken, Dorado, Predador
- Sealed to keep the pod dry
- Weighs less than 4lbs
- Original Feelfree Pod
INCLUDES
- ThruHullPod Adapter for FeelFree Kayaks
- Bixpy Propeller Housing with reduced width for a better fit
ADDITIONAL INFORMATION
- Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Marine grade stainless steel components for salt water or fresh water use
INSTALLATION GUIDES
Click here for installation guides and videos.
If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
-
Starting at: $44.99
With the Vibe Yellowfin Series Deck Padding Kit, your kayak will look slick, without the slip. The 5mm EVA material provides exceptional traction either wet or dry, and the sweet design adds flair to your already awesome kayak.
-
$89.00
This rugged accessory is the ultimate DIY Steering Bracket. Depending on your installation and setup, you may need to move your steering wing up or down along the motor shaft.
The Adjustable V-ARM™ Steering Bracket gives you full range of motion and adjusts to provide responsive and fine tuned steering.
You can install this adapter with the steering eyelets pointed up or down for more adjustability.
The center hole is designed specifically for the Bixpy J-2 Motor shafts with a 1″ outside diameter.
INCLUDES
- Adjustable V-ARM™ Steering Bracket
-
$79.00
The Bixpy Pole Steering Bracket can be used with any of the Bixpy Adapters that offer a 1″ vertical pipe (the blue pipes).
-
$39.00
PRODUCT DESCRIPTION
The Kare Kit for the Bixpy J-2 Motor is the ideal emergency kit to always have on board.
It includes the Fine Grill Bixpy Propeller Guard, a spare propeller, a CR2032 Battery battery cell for your remote and a 5ml tube of multi-purpose di-electric grease to protect your connector.
INCLUDES
- 1 PowerShroud™ Propeller Guard – Fine Grill
- 1 Bixpy PowerShroud™ Propeller
- 1 CR2032 – Outboard Remote Battery
- 1 5ml tube of multi-purpose di-electric grease
INSTALLATION GUIDES
Click here for installation of the Propeller Guard Grill
Click here to best practices on mating your connectors
* Propellers may be blue or charcoal gray depending on our inventory – both propellers are made of exactly the same material
-
$29.00
PRODUCT DESCRIPTION
The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!
This is a great tool for pod mounts on kayaks or a variety of other applications where you need to vertically attach the Bixpy Motor to a flat surface.
If you have a J-2 Motor, this adapter will simply attach directly to your J-2 motor. J-1 Motors will require a Standard Attachment to adapt to the motor before attaching this adapter.
-
$89.00
The Bixpy Gudgeon Mount is designed to allow the mounting of a rudder with a 10mm pin onto most kayaks, canoes, small sailboats or whatever else you can dream up.
-
$45.00
The Bixpy Simple Gudgeon Mount is needed to mount our Universal Rudder Adapter to most kayaks with pre-tapped mounting holes with screw inserts found on the stern of the kayak (such as Wilderness System, Necky, Ocean Kayak, Emotion, and more).
-
Starting at: $35.00
The Bixpy Extension Cord allows you to place your Outboard Battery Pack further from your motor. If you would like to store your battery in the front hatch of your kayak or Standup Paddle Board or simply want the battery further from your motor, this is what you’ll need. Like any other extension cord, you can plug multiple cords together to achieve a desired length.
It is important to remember that extension cords do reduce the efficiency of the system, specially at higher speeds. So buy the shortest cable you need for your purpose. There is roughly a 1% to 4% power loss with a 4.5 ft extension cord and a 2% to 8% power loss with the 9 ft cable.
End of content
End of content
