Run your Livewell/Bait tank for 24 hours – continuously!!
Tired of replacing your SLA battery every season? The PP-77 LW is a compact high output 6V power bank designed to replace your old SLA batteries in any application.
No Drilling. No Hassle. The Low Profile – THRUHULL™ PEDAL DRIVE ADAPTER (J-2 Motors) clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power.
No Drilling. No Hassle. This Pedal Drive Adapter clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power.
FEATURES
Now fits more kayaks including all roto-molded Hobie® kayaks, Inflatable Hobie® kayaks, Vibe Kayaks, Pelican Kayaks and Lightening Kayaks. Please note that this adapter does not fit the new Hobie® MirageDrive 360.
INCLUDES
Pedal Drive Adapter
Bixpy Propeller Housing with reduced width for a better fit (required for most kayaks)
ADDITIONAL INFORMATION
Cable length from motor connector end to battery connector end (including blue pipe): 6 feet (1.85 m)
Thruster draft: 12″ (30.5 cm) from bottom of kayak to bottom of motor
Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for salt water or fresh water use
The DIY (Do It Yourself) ThruHull POD Adapter is the perfect DIY Adapter for the do it yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.
Click here to download a printable template for installing the Pod Adpater.
Please note: Pods in pictures shown are for illustration purposes only and not included.
FEATURES
Sturdy and stable adapter with all parts included for easy installation
Seales to keep the pod dry
Weighs less than 2 lbs
Dry pod not included
Motor shield to protect the motor in case of accidental collision with bottom
INCLUDES
DIY (Do It Yourself) ThruHull™ POD Adapter kit with all hardware
ADDITIONAL INFORMATION
Motor draft: 10″ (25 cm) from bottom of kayak to bottom of motor
Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for salt water or fresh water use
If you require a reduced shroud to inserts , click here to add one to your cart
* Pods and Motors shown in pictures not included in the Adapter Kits. If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
If your paddle board or kayak has a Flip and Lock Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.
If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Flip & Lock fin, this is what you’ll need.
INCLUDES
Flip & Lock Fin Adapter
Locking tab and leash
ADDITIONAL INFORMATION
Protection: Water-proof, dirt-proof and corrosion resistant components INSTALLATION GUIDES
If your paddle board or kayak has a US Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.
If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a new US SUP fin, this is what you’ll need.
Make sure that you are getting the right Bixpy fin for your fin box by visting our Contact page or via our Online Chat.
INCLUDES
Bixpy US SUP Fin
All stainless steel hardware required to attach the fin to your fin box
ADDITIONAL INFORMATION
Protection: Water-proof, dirt-proof and corrosion resistant components
Water use: Marine grade stainless steel components for salt water or fresh water use
* Motors in pictures not included. If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
No holes, no kayak modifications and simple Plug and Play installation!
The Hobie Twist and Stow Rudder Adapter replaces your Hobie rudder with a Bixpy Rudder and enable you to attach your J-2 Motor to your kayak’s rudder assembly. Steering is done using your Hobie steering system.
INCLUDES
Hobie Twist and Stow Rudder blade
All hardware required will be on your existing Hobie Rudder
ADDITIONAL INFORMATION
Protection: Water-proof, dirt-proof and corrosion resistant housing and components
* Please note, this rudder adapter is ONLY compatible with Hobie Twist and Stow rudders. That includes: Hobie Sport Kayaks, Hobie Revolution Kayaks, Hobie Outbacks (pre 2019) and Hobie Oasis Kayaks.
** Not recommended on Inflatable Hobie Kayaks and this adapter won’t fit Hobie Pro Angler, Passport, Compass, 2019+ Outbacks and Island Series kayaks.
† This adapter blade will NOT work with J-1 Motors
Motors and batteries in pictures not include in adapter price. Some pictures may have other models illustrated.
The ThruHull Pod Adapter for Bonafide Kayaks clips into the Dry Pod opening of your Bonafide kayak in seconds.
The adapter comes with the original Bonafide Dry Pod, allowing you to store and quickly access your gear or personal items.
The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the Dry Pod and can continue to use it for its intended purpose as you motor in your Bonafide kayak.
This adapter also features a motor shield that protects the motor in case of a light impact.
Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.
FEATURES
Quick and easy installation
Works with SS107 & SS127
Sealed to keep the pod dry
Weighs less than 4lbs
Original Bonafide Dry Pod
INCLUDES
ThruHull Pod Adapter for Bonafide Kayaks
Bixpy Propeller Housing with reduced width for a better fit
ADDITIONAL INFORMATION
Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for salt water or fresh water use
The ThruHul Pod Adapter for Feelfree Kayaks clips into the pod opening of your Feelfree kayak in seconds.
The adapter comes with the original Feelfree pod, allowing you to store and quickly access your gear or personal items.
The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the pod and can continue to use it for its intended purpose as you motor in your FeelFree kayak.
This ThruHul Pod Adapter for Feelfree Kayaks also features a motor shield that protects the motor in case of a light impact.
Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.
FEATURES
Quick and easy installation
Works with FeelFree Lure, Moken, Dorado, Predador
Sealed to keep the pod dry
Weighs less than 4lbs
Original Feelfree Pod
INCLUDES
ThruHullPod Adapter for FeelFree Kayaks
Bixpy Propeller Housing with reduced width for a better fit
ADDITIONAL INFORMATION
Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for salt water or fresh water use
The Kare Kit for the Bixpy J-2 Motor is the ideal emergency kit to always have on board.
It includes the Fine Grill Bixpy Propeller Guard, a spare propeller, a CR2032 Battery battery cell for your remote and a 5ml tube of multi-purpose di-electric grease to protect your connector.
INCLUDES
1 PowerShroud™ Propeller Guard – Fine Grill
1 Bixpy PowerShroud™ Propeller
1 CR2032 – Outboard Remote Battery
1 5ml tube of multi-purpose di-electric grease
INSTALLATION GUIDES
Click here for installation of the Propeller Guard Grill Click here to best practices on mating your connectors
* Propellers may be blue or charcoal gray depending on our inventory – both propellers are made of exactly the same material
If you already have your Bixpy Jet from another kit and would like to attach your motor to your standup paddle board, this is what you’ll need. Don’t forget, if you don’t have a Bixpy Outdoor Power Pack, you’ll need to get one of those as well.
INCLUDES
Bixpy SUP fin (Choose required version; US or Standard Fin Box)
With the Bixpy Universal Kayak & Canoe Adapter, you can attach your Bixpy Jet to virtually any kayak, canoe or similar watercraft. The aluminum pipes will adjust to accommodate virtually any length, and the mechanism includes an ingenious adjustment arm to accommodate a wide variety of slopes in the back of various kayaks.
As every kayak is slightly different in shape and configuration, you will have to do a little bit of installation with this adapter, but rest assured, the Bixpy Universal Kayak & Canoe Adapter comes complete with all the nuts and bolts you’ll need and complete instructions.
BIXPY PERFORMANCE
INCLUDES
Bixpy Universal Kayak & Canoe Adapter
All hardware required to attach to kayaks and canoes
If you already have your Bixpy Jet from another kit and would like to attach your motor to your inflatable kayak, this is what you’ll need. Don’t forget, if you don’t have a Bixpy Outdoor Battery Box, you’ll need to get one of those as well. Your battery pack comes with a remote control.
INCLUDES
Bixpy Inflatable Adapter (For Inflatable Kayaks or iSUP’s that don’t have removable fin boxes)
With the Bixpy Universal Transom Adapter, you can attach your Bixpy Jet to virtually any watercraft with a flat vertical mounting surface. This includes most dinghies, some kayaks, personal pontoons and a variety of other watercraft. The aluminum pipe will adjust to accommodate virtually any depth to meet your needs.
This kit also includes a complete steering mechanism that will allow you to steer the motor for full control of your kayak. The shaft holding the motor also features a “kick-up” mechanism that will allow the motor to release and swing if it hits bottom.
FEATURES
Fits visually any transom plate
Adjustable depth
Quick release disassembly
Adjustable trim
Super sturdy construction
INCLUDES
Bixpy Universal Transom Adapter
All hardware required to attach to dinghies, kayaks, personal pontoons and a variety of other watercraft
Wire to run to your Bixpy Battery Box
Tiller Steering Handle (2 sizes – 12″ and 24″ included)
Your Bixpy Outboard Battery Box has a 12V outlet for you to plug in your fish finder or other 12V electronics. This cable allows you to do just that and keep everything water tight.
Another great feature of your Bixpy Outboard Battery box is this handy USB charger port. It is a great feature for when your phone or tablet is running low on battery whether on water or land.
Keep in mind, the USB port is NOT water proof and you should keep it dry at all times and the output is only 1 amp, which means slow charges. This is to preserve your battery for use with your Bixpy Jet and primarily serves as an emergency charger.