bixpy j-2

Showing all 14 results

Power Pole Adapter (K-1 & J-2 Motors)
$199.00
The Power Pole WillFit™ Adapter allows you to quickly and easily add a Bixpy Motor to your kayak using your standard Micro Power Pole adapter slot.

If your kayak accommodates a Micro Anchor Power Pole, you can simply screw this adapter onto your Power Pole in seconds – no tools required!

If your kayak is Power Pole ready, but requires a special mounting plate (i.e. some Hobie Pro Anglers, Wilderness Atak, Native Propel, etc.) you will need that mounting plate from your kayak manufacturer to make installation easier.

If your kayak does not have a power pole mount, this is still an excellent, stable option for mounting a Bixpy Motor to your kayak as long as you have a fairly flat area in the rear of your kayak to accommodate the adapter’s foot print. If you’re not sure, you can download the adapter’s outline by clicking here and trying it on your kayak.

NOTE: Pole Steering as shown in some of the pictures is NOT included in this adapter kit and can be purchased separately.

FEATURES
- Quick release for getting on and off the water quickly
- Hinge that allows the motor to lift completely out of the water
- 9.5″ to 14.5″ from bottom of plate to bottom of motor – it is recommended that the bottom of your motor be about 3″ to 5″ below the waterline and more in choppy water as necessary
- 270° of rotational trim – adapter ships with set screws in place. To achieve steering, set screws must be removed.
INCLUDES
- Bixpy Power Pole Adapter
- All hardware required to attach to Power Pole ready kayaks
- Pole Steering Adapter Adapter illustrated NOT included and sold separately
ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for saltwater or fresh water use

INSTALLATION GUIDES

Click here for installation guides and videos

* Motors pictured not included in adapter kit. If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
Add to cart
Universal Kayak Adapter (K-1 & J-2 Motors)
$149.00
PRODUCT DESCRIPTION

With the Universal Kayak Adapter, you can attach your Bixpy J-2 Motor to virtually any kayak, canoe or small watercraft. The aluminum pipes will adjust to accommodate virtually any length and configuration, and the mechanism includes an ingenious adjustment arm to accommodate a wide variety of slopes in the back of various watercraft.

As every kayak is slightly different in shape and configuration, you will have to do a little bit of installation with this adapter, but rest assured, this adapter ships complete with all the nuts and bolts you’ll need to get the job done. This is a more complex adapter, requiring higher levels of DIY ability, so it’s only recommended if none of our other Adapters fit your kayak and you’re comfortable taking on the task of installation or have access to a professional installer.

INCLUDES
- Universal Kayak & Canoe Adapter
- All hardware required to attach to kayaks and canoes
ADDITIONAL INFORMATION
- Adapter: Attaches to virtually any kayak or canoe with adjustable hardware
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Marine grade stainless steel components for salt water or fresh water use
INSTALLATION GUIDES

Click here for installation guides and videos

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
Add to cart
Universal Rudder Adapter (K-1 & J-2 Motors)
$149.00
PRODUCT DESCRIPTION

The Vibe Bixpy-Ready Gravity Rudder is the first rudder in the market specifically designed to accept a motor as an option. The bottom portion of the rudder unscrews in seconds to allow you to attach your J-2 Motor directly onto the rudder.

The Vibe Bixpy-Ready Gravity Rudder offers a molded 10mm stainless steel pin that offers easy installation and not only fits all Vibe kayaks but can replace most other manufacturer rudders in seconds! It also offers a robust double hinged, 90° Slide & Stow mechanism that gets the rudder completely out of the water in a heartbeat!

The Vibe Bixpy-Ready Gravity Rudder also features a gravity driven locking mechanism that allows the rudder to lock into place when motorized in forward or reverse. However, since the locking only occurs with gravity, the rudder easily “unlocks” and pops up to protect your motor and rudder in shallow water. Steering your rudder can be done using your existing rudder steering system if you have one and if not, you can choose from a variety of options in our Steering Options.

FEATURES
- Mounts into any standard rudder 10mm pin hole
- Gravity deployment system
- 90° quick Slide & Stow feature
- Gravity “Lock-down” mechanism for reverse speeds
- 18in. x 4in. rudder blade
- Kick up feature for shallow water and hazards
- Removable cap for mounting Bixpy Jet Motor
INCLUDES
- Vibe Bixpy-Ready Gravity Rudder
- Bixpy Clam Cleat
- Pull up rope
INSTALLATION GUIDES

Click here for installation guides and videos.

* Motors shown in pictures not included in adapter kits.

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
Add to cart
Sale!
Bixpy PP-378 Outboard Battery V4 – Black Friday Sale!
Original price was: $699.00.Current price is: $594.15.

SKU: BA-OBB-2103 | UPC: 00858457007505

To turn the Bixpy K-1 or J-2 Motor into the ultimate trolling motor, we have developed the Bixpy Outboard Battery for use in small personal watercraft. This high performance lithium ion battery is fine tuned to get the most out of your K-1 or J-2 Motor. The battery is extremely lightweight and provides hours of clean, quiet power for your motor. But beyond that, it offers some unique features not commonly found in other marine batteries.

The Bixpy Outboard Batteries are fully waterproof and corrosion resistant in addition to being buoyant, so in the inevitable event of a kayak or SUP flip or large waves, the last thing you need to worry about is your battery getting wet or falling into the water. The slender body design of the PP-378 allows for a variety of storage and carry options. In most fishing kayaks, the batteries can easily fit under the seats. They can also be strapped to fishing crates, stored in kayak bellies or inside most fishing kayak hatches.

Battery output is controlled via a sealed, waterproof, buoyant, wireless controller that can be worn on your wrist or carried anywhere else on your boat. In addition, the Bixpy Outboard Batteries offer a 5V and 12V outlet for charging or running your personal electronics on board.

*Disclaimer: This is the version 4 of the PP-378 Outboard Battery, and it will only work with bluetooth remotes that come with the version 4 PP-378. The V4 has white lights on the battery and is also sold with the K-1 Outboard Kits. If you have a remote for a battery that does not have white lights, it will not work. The remotes that are sold with the PP-768 Batteries are also compatible with the version 4 PP-378 Batteries.

You can update your Bixpy PP-378 battery (version 4 with white lights) and remote with the newest firmware by using our Bixpy App. Click here to download the app in the Apple Store and click here to download the app in Google Play.

Add to cart
DIY (Do It Yourself) ThruHull POD Adapter (J-2 Motors)
$119.00
PRODUCT DESCRIPTION

The DIY (Do It Yourself) ThruHull POD Adapter is the perfect DIY Adapter for the do it yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.

Click here to download a printable template for installing the Pod Adpater.

Please note: Pods in pictures shown are for illustration purposes only and not included.

FEATURES
- Sturdy and stable adapter with all parts included for easy installation
- Seales to keep the pod dry
- Weighs less than 2 lbs
- Dry pod not included
- Motor shield to protect the motor in case of accidental collision with bottom
INCLUDES
- DIY (Do It Yourself) ThruHull™ POD Adapter kit with all hardware
ADDITIONAL INFORMATION
- Motor draft: 10″ (25 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Marine grade stainless steel components for salt water or fresh water use
- If you require a reduced shroud to inserts , click here to add one to your cart
* Pods and Motors shown in pictures not included in the Adapter Kits. If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
Add to cart
DIY Fin Adapter for Inflatables (K-1 & J-2 Motors)
$69.00
PRODUCT DESCRIPTION

If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.

For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.

This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com

INCLUDES
- Inflatable Fin Box – Adapter
- Bixpy Slide & Lock Fin Adapter
- All hardware required
ADDITIONAL INFORMATION
- Additional features: Easily attached to your Bixpy Motor
- Motor draft: 6″ (15 cm)
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use
INSTALLATION GUIDES

Click here for installation guides and videos
* Motors shown in pictures not included in the Adapter Kits

If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.

For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.

This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com

INCLUDES
- Inflatable Fin Box – Adapter
- Bixpy Slide & Lock Fin Adapter
- All hardware required
ADDITIONAL INFORMATION
- Additional features: Easily attached to your Bixpy Motor
- Motor draft: 6″ (15 cm)
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use
INSTALLATION GUIDES

Click here for installation guides and videos
* Motors shown in pictures not included in the Adapter Kits
Add to cart
Flip and Lock Fin Adapter (K-1, J-2 & J-1 Motors)
$35.00
PRODUCT DESCRIPTION

If your paddle board or kayak has a Flip and Lock Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.

If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Flip & Lock fin, this is what you’ll need.

INCLUDES
- Flip & Lock Fin Adapter
- Locking tab and leash
ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant components
INSTALLATION GUIDES

Click here for installation guides and videos.

* Motor in pictures not included
Add to cart
Slide and Lock Fin (K-1, J-2 & J-1 Motors)
$35.00
PRODUCT DESCRIPTION

If your paddle board or kayak has a Slide & Lock (sometimes called a Standard Fin Plate), this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.

If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Slide & Lock fin, this is what you’ll need.

INCLUDES
- Flip & Lock Fin Adapter
- Locking tab and leash
ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant components

INSTALLATION GUIDES:

Click Here for installation and video guides

* Motors in pictures not included
Add to cart
US Fin Adapter (K-1, J-2 & J-1 motors)
$35.00
PRODUCT DESCRIPTION

If your paddle board or kayak has a US Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.

If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a new US SUP fin, this is what you’ll need.

Make sure that you are getting the right Bixpy fin for your fin box by visting our Contact page or via our Online Chat.

INCLUDES
- Bixpy US SUP Fin
- All stainless steel hardware required to attach the fin to your fin box
ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant components
Water use: Marine grade stainless steel components for salt water or fresh water use

* Motors in pictures not included. If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
Add to cart
Hobie Twist and Stow Rudder Adapter (K-1 & J-2 Motors)
$59.00
PRODUCT DESCRIPTION

No holes, no kayak modifications and simple Plug and Play installation!

The Hobie Twist and Stow Rudder Adapter replaces your Hobie rudder with a Bixpy Rudder and enable you to attach your J-2 Motor to your kayak’s rudder assembly. Steering is done using your Hobie steering system.

INCLUDES
- Hobie Twist and Stow Rudder blade
- All hardware required will be on your existing Hobie Rudder
ADDITIONAL INFORMATION
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
INSTALLATION GUIDES

Click here for installation guides and videos

* Please note, this rudder adapter is ONLY compatible with Hobie Twist and Stow rudders. That includes: Hobie Sport Kayaks, Hobie Revolution Kayaks, Hobie Outbacks (pre 2019) and Hobie Oasis Kayaks.
** Not recommended on Inflatable Hobie Kayaks and this adapter won’t fit Hobie Pro Angler, Passport, Compass, 2019+ Outbacks and Island Series kayaks.
† This adapter blade will NOT work with J-1 Motors

Motors and batteries in pictures not include in adapter price. Some pictures may have other models illustrated.

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
Add to cart
ThruHull Pod Adapter – Bonafide Kayaks (J-2 Motors)
$249.00
PRODUCT DESCRIPTION

No Drilling. No holes. No hassle!

The ThruHull Pod Adapter for Bonafide Kayaks clips into the Dry Pod opening of your Bonafide kayak in seconds.

The adapter comes with the original Bonafide Dry Pod, allowing you to store and quickly access your gear or personal items.

The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the Dry Pod and can continue to use it for its intended purpose as you motor in your Bonafide kayak.

This adapter also features a motor shield that protects the motor in case of a light impact.

Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.

FEATURES
- Quick and easy installation
- Works with SS107 & SS127
- Sealed to keep the pod dry
- Weighs less than 4lbs
- Original Bonafide Dry Pod
INCLUDES
- ThruHull Pod Adapter for Bonafide Kayaks
- Bixpy Propeller Housing with reduced width for a better fit
ADDITIONAL INFORMATION
- Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Marine grade stainless steel components for salt water or fresh water use
INSTALLATION GUIDES

Click here for installation guides and videos.

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
Add to cart
ThruHull Pod Adapter – Feelfree Kayaks (J-2 Motors)
$249.00
PRODUCT DESCRIPTION

No Drilling. No holes. No hassle!

The ThruHul Pod Adapter for Feelfree Kayaks clips into the pod opening of your Feelfree kayak in seconds.

The adapter comes with the original Feelfree pod, allowing you to store and quickly access your gear or personal items.

The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the pod and can continue to use it for its intended purpose as you motor in your FeelFree kayak.

This ThruHul Pod Adapter for Feelfree Kayaks also features a motor shield that protects the motor in case of a light impact.

Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.

FEATURES
- Quick and easy installation
- Works with FeelFree Lure, Moken, Dorado, Predador
- Sealed to keep the pod dry
- Weighs less than 4lbs
- Original Feelfree Pod
INCLUDES
- ThruHullPod Adapter for FeelFree Kayaks
- Bixpy Propeller Housing with reduced width for a better fit
ADDITIONAL INFORMATION
- Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Marine grade stainless steel components for salt water or fresh water use
INSTALLATION GUIDES

Click here for installation guides and videos.

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
Add to cart
J-2 Motor Kare Kit
$39.00
PRODUCT DESCRIPTION

The Kare Kit for the Bixpy J-2 Motor is the ideal emergency kit to always have on board.

It includes the Fine Grill Bixpy Propeller Guard, a spare propeller, a CR2032 Battery battery cell for your remote and a 5ml tube of multi-purpose di-electric grease to protect your connector.

INCLUDES
- 1 PowerShroud™ Propeller Guard – Fine Grill
- 1 Bixpy PowerShroud™ Propeller
- 1 CR2032 – Outboard Remote Battery
- 1 5ml tube of multi-purpose di-electric grease
INSTALLATION GUIDES

Click here for installation of the Propeller Guard Grill
Click here to best practices on mating your connectors

* Propellers may be blue or charcoal gray depending on our inventory – both propellers are made of exactly the same material
Add to cart
Flat Surface Bracket (K-1 and J-2 Motors)
$29.00
PRODUCT DESCRIPTION

The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!

This is a great tool for pod mounts on kayaks or a variety of other applications where you need to vertically attach the Bixpy Motor to a flat surface.

If you have a J-2 Motor, this adapter will simply attach directly to your J-2 motor. J-1 Motors will require a Standard Attachment to adapt to the motor before attaching this adapter.

Add to cart