Bixpy adapter

Showing all 11 results

Sale!
DIY (Do It Yourself) ThruHull POD Adapter (K-1 Motors)
Original price was: $149.00.Current price is: $111.75.
The DIY (Do It Yourself) ThruHull™ POD Adapter is the perfect DIY Adapter for the do-it-yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.

Click here to download a printable template for installing the Pod Adapter.

Make sure that you are getting the right Bixpy adapter for your watercraft, contact us if you’re not sure.

* Pods and motors in the pictures above are not included in the adapter kit

Add to cart
Sale!
Power Pole Adapter (K-1 & J-2 Motors)
Original price was: $199.00.Current price is: $149.25.
The Power Pole WillFit™ Adapter allows you to quickly and easily add a Bixpy Motor to your kayak using your standard Micro Power Pole adapter slot.

If your kayak accommodates a Micro Anchor Power Pole, you can simply screw this adapter onto your Power Pole in seconds – no tools required!

If your kayak is Power Pole ready, but requires a special mounting plate (i.e. some Hobie Pro Anglers, Wilderness Atak, Native Propel, etc.) you will need that mounting plate from your kayak manufacturer to make installation easier.

If your kayak does not have a power pole mount, this is still an excellent, stable option for mounting a Bixpy Motor to your kayak as long as you have a fairly flat area in the rear of your kayak to accommodate the adapter’s foot print. If you’re not sure, you can download the adapter’s outline by clicking here and trying it on your kayak.

NOTE: Pole Steering as shown in some of the pictures is NOT included in this adapter kit and can be purchased separately.

FEATURES
- Quick release for getting on and off the water quickly
- Hinge that allows the motor to lift completely out of the water
- 9.5″ to 14.5″ from bottom of plate to bottom of motor – it is recommended that the bottom of your motor be about 3″ to 5″ below the waterline and more in choppy water as necessary
- 270° of rotational trim – adapter ships with set screws in place. To achieve steering, set screws must be removed.
INCLUDES
- Bixpy Power Pole Adapter
- All hardware required to attach to Power Pole ready kayaks
- Pole Steering Adapter Adapter illustrated NOT included and sold separately
ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for saltwater or fresh water use

INSTALLATION GUIDES

Click here for installation guides and videos

* Motors pictured not included in adapter kit. If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
Add to cart
Sale!
Bixpy ThruHull Pod Adapter – Bonafide Kayaks (K-1 Motors)
Original price was: $249.00.Current price is: $186.75.

Description

No drilling. No holes. No hassle! The ThruHull Pod Adapter for Bonafide Kayaks clips into the Dry Pod opening of your Bonafide kayak in seconds.

The adapter comes with the original Bonafide Dry Pod, allowing you to store and quickly access your gear or personal items.

The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the Dry Pod and can continue to use it for its intended purpose as you motor in your Bonafide kayak.

This adapter also features a motor shield that protects the motor in case of a light impact.

Make sure that you are getting the right Bixpy adapter for your watercraft by contacting us.

Please note: Installation of a motor on the pod will not leave enough space for installing a transducer as intended.

* Motors shown in the above pictures are not included in the adapter kit

Add to cart
Sale!
NuCanoe QuickConnect Adapter (K-1 & J-2 Motors)
Original price was: $489.00.Current price is: $366.75.
The QuickConnect Foot Steering Mounting & Control Kit is a custom-designed kit for mounting, steering, and retracting the Bixpy Motor on the NuCanoe Frontier 12 or the NuCanoe UNLIMITED. Take control with the QuickConnect Foot Steering Mounting and Control kit. Installs in seconds and lets you have full control over your propulsion with a flick of your foot. Hands-free kayaking is now a reality!

Add to cart
Sale!
Low Profile – THRUHULL™ PEDAL DRIVE ADAPTER (J-2 Motors)
Original price was: $179.00.Current price is: $134.25.
No Drilling. No Hassle. The Low Profile – THRUHULL™ PEDAL DRIVE ADAPTER (J-2 Motors) clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power.

Now fits more kayaks including:
- All roto-molded Hobie® kayaks with Mirage Drive
- Hobie Lynx with Mirage Drive
- Inflatable Hobie® kayaks with Mirage Drive
- Vibe Kayaks with X-Drive
- Pelican Kayaks with HD Drive
Add to cart
Sale!
DIY Fin Adapter for Inflatables (K-1 & J-2 Motors)
Original price was: $69.00.Current price is: $51.75.
PRODUCT DESCRIPTION

If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.

For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.

This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com

INCLUDES
- Inflatable Fin Box – Adapter
- Bixpy Slide & Lock Fin Adapter
- All hardware required
ADDITIONAL INFORMATION
- Additional features: Easily attached to your Bixpy Motor
- Motor draft: 6″ (15 cm)
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use
INSTALLATION GUIDES

Click here for installation guides and videos
* Motors shown in pictures not included in the Adapter Kits

If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.

For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.

This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com

INCLUDES
- Inflatable Fin Box – Adapter
- Bixpy Slide & Lock Fin Adapter
- All hardware required
ADDITIONAL INFORMATION
- Additional features: Easily attached to your Bixpy Motor
- Motor draft: 6″ (15 cm)
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use
INSTALLATION GUIDES

Click here for installation guides and videos
* Motors shown in pictures not included in the Adapter Kits
Add to cart
Sale!
Flip and Lock Fin Adapter (K-1, J-2 & J-1 Motors)
Original price was: $35.00.Current price is: $26.25.
PRODUCT DESCRIPTION

If your paddle board or kayak has a Flip and Lock Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.

If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Flip & Lock fin, this is what you’ll need.

INCLUDES
- Flip & Lock Fin Adapter
- Locking tab and leash
ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant components
INSTALLATION GUIDES

Click here for installation guides and videos.

* Motor in pictures not included
Add to cart
Sale!
Slide and Lock Fin (K-1, J-2 & J-1 Motors)
Original price was: $35.00.Current price is: $26.25.
PRODUCT DESCRIPTION

If your paddle board or kayak has a Slide & Lock (sometimes called a Standard Fin Plate), this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.

If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Slide & Lock fin, this is what you’ll need.

INCLUDES
- Flip & Lock Fin Adapter
- Locking tab and leash
ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant components

INSTALLATION GUIDES:

Click Here for installation and video guides

* Motors in pictures not included
Add to cart
Sale!
Hobie Twist and Stow Rudder Adapter (K-1 & J-2 Motors)
Original price was: $59.00.Current price is: $44.25.
PRODUCT DESCRIPTION

No holes, no kayak modifications and simple Plug and Play installation!

The Hobie Twist and Stow Rudder Adapter replaces your Hobie rudder with a Bixpy Rudder and enable you to attach your J-2 Motor to your kayak’s rudder assembly. Steering is done using your Hobie steering system.

INCLUDES
- Hobie Twist and Stow Rudder blade
- All hardware required will be on your existing Hobie Rudder
ADDITIONAL INFORMATION
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
INSTALLATION GUIDES

Click here for installation guides and videos

* Please note, this rudder adapter is ONLY compatible with Hobie Twist and Stow rudders. That includes: Hobie Sport Kayaks, Hobie Revolution Kayaks, Hobie Outbacks (pre 2019) and Hobie Oasis Kayaks.
** Not recommended on Inflatable Hobie Kayaks and this adapter won’t fit Hobie Pro Angler, Passport, Compass, 2019+ Outbacks and Island Series kayaks.
† This adapter blade will NOT work with J-1 Motors

Motors and batteries in pictures not include in adapter price. Some pictures may have other models illustrated.

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
Add to cart
Sale!
ThruHull Pod Adapter – Bonafide Kayaks (J-2 Motors)
Original price was: $249.00.Current price is: $186.75.
PRODUCT DESCRIPTION

No Drilling. No holes. No hassle!

The ThruHull Pod Adapter for Bonafide Kayaks clips into the Dry Pod opening of your Bonafide kayak in seconds.

The adapter comes with the original Bonafide Dry Pod, allowing you to store and quickly access your gear or personal items.

The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the Dry Pod and can continue to use it for its intended purpose as you motor in your Bonafide kayak.

This adapter also features a motor shield that protects the motor in case of a light impact.

Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.

FEATURES
- Quick and easy installation
- Works with SS107 & SS127
- Sealed to keep the pod dry
- Weighs less than 4lbs
- Original Bonafide Dry Pod
INCLUDES
- ThruHull Pod Adapter for Bonafide Kayaks
- Bixpy Propeller Housing with reduced width for a better fit
ADDITIONAL INFORMATION
- Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Marine grade stainless steel components for salt water or fresh water use
INSTALLATION GUIDES

Click here for installation guides and videos.

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
Add to cart
Sale!
Flat Surface Bracket (K-1 and J-2 Motors)
Original price was: $29.00.Current price is: $21.75.
PRODUCT DESCRIPTION

The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!

This is a great tool for pod mounts on kayaks or a variety of other applications where you need to vertically attach the Bixpy Motor to a flat surface.

If you have a J-2 Motor, this adapter will simply attach directly to your J-2 motor. J-1 Motors will require a Standard Attachment to adapt to the motor before attaching this adapter.

Add to cart