The ThruHull Pod Adapter for Bonafide Kayaks clips into the Dry Pod opening of your Bonafide kayak in seconds.
The adapter comes with the original Bonafide Dry Pod, allowing you to store and quickly access your gear or personal items.
The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the Dry Pod and can continue to use it for its intended purpose as you motor in your Bonafide kayak.
This adapter also features a motor shield that protects the motor in case of a light impact.
Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.
FEATURES
Quick and easy installation
Works with SS107 & SS127
Sealed to keep the pod dry
Weighs less than 4lbs
Original Bonafide Dry Pod
INCLUDES
ThruHull Pod Adapter for Bonafide Kayaks
Bixpy Propeller Housing with reduced width for a better fit
ADDITIONAL INFORMATION
Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for salt water or fresh water use
The ThruHul Pod Adapter for Feelfree Kayaks clips into the pod opening of your Feelfree kayak in seconds.
The adapter comes with the original Feelfree pod, allowing you to store and quickly access your gear or personal items.
The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the pod and can continue to use it for its intended purpose as you motor in your FeelFree kayak.
This ThruHul Pod Adapter for Feelfree Kayaks also features a motor shield that protects the motor in case of a light impact.
Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.
FEATURES
Quick and easy installation
Works with FeelFree Lure, Moken, Dorado, Predador
Sealed to keep the pod dry
Weighs less than 4lbs
Original Feelfree Pod
INCLUDES
ThruHullPod Adapter for FeelFree Kayaks
Bixpy Propeller Housing with reduced width for a better fit
ADDITIONAL INFORMATION
Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for salt water or fresh water use
This rugged accessory is the ultimate DIY Steering Bracket. Depending on your installation and setup, you may need to move your steering wing up or down along the motor shaft.
The Adjustable V-ARM™ Steering Bracket gives you full range of motion and adjusts to provide responsive and fine tuned steering.
You can install this adapter with the steering eyelets pointed up or down for more adjustability.
The center hole is designed specifically for the Bixpy J-2 Motor shafts with a 1″ outside diameter.
The Kare Kit for the Bixpy J-2 Motor is the ideal emergency kit to always have on board.
It includes the Fine Grill Bixpy Propeller Guard, a spare propeller, a CR2032 Battery battery cell for your remote and a 5ml tube of multi-purpose di-electric grease to protect your connector.
INCLUDES
1 PowerShroud™ Propeller Guard – Fine Grill
1 Bixpy PowerShroud™ Propeller
1 CR2032 – Outboard Remote Battery
1 5ml tube of multi-purpose di-electric grease
INSTALLATION GUIDES
Click here for installation of the Propeller Guard Grill Click here to best practices on mating your connectors
* Propellers may be blue or charcoal gray depending on our inventory – both propellers are made of exactly the same material
The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!
This is a great tool for pod mounts on kayaks or a variety of other applications where you need to vertically attach the Bixpy Motor to a flat surface.
If you have a J-2 Motor, this adapter will simply attach directly to your J-2 motor. J-1 Motors will require a Standard Attachment to adapt to the motor before attaching this adapter.
The Bixpy Gudgeon Mount is designed to allow the mounting of a rudder with a 10mm pin onto most kayaks, canoes, small sailboats or whatever else you can dream up.
The Bixpy Simple Gudgeon Mount is needed to mount our Universal Rudder Adapter to most kayaks with pre-tapped mounting holes with screw inserts found on the stern of the kayak (such as Wilderness System, Necky, Ocean Kayak, Emotion, and more).
The Bixpy Extension Cord allows you to place your Outboard Battery Pack further from your motor. If you would like to store your battery in the front hatch of your kayak or Standup Paddle Board or simply want the battery further from your motor, this is what you’ll need. Like any other extension cord, you can plug multiple cords together to achieve a desired length.
It is important to remember that extension cords do reduce the efficiency of the system, specially at higher speeds. So buy the shortest cable you need for your purpose. There is roughly a 1% to 4% power loss with a 4.5 ft extension cord and a 2% to 8% power loss with the 9 ft cable.
Select options
This product has multiple variants. The options may be chosen on the product page
The Bixpy Hand Steering Kit is a compact system which provides steering for the Universal Kayak Adapter and the Rudder Adapter. This steering system can also be used for non-Bixpy applications.
Your Bixpy Outboard Battery Box has a 12V outlet for you to plug in your fish finder or other 12V electronics. This cable allows you to do just that and keep everything water tight.
The Bixpy Foot Pedal Steering System is a simple to use and robust foot pedal system which can provide steering for most Bixpy Adpaters, including the Universal Kayak Adapter, Rudder Adapter, Transom Adapter, Power Pole Adapter.
The Bixpy Tiller Steering Handle is a universal addition to any Bixpy adapter with a vertical down pipe (the blue pipes). You can easily bolt this steering adapter to your existing Bixpy Steering Wing and use it to steer your Bixpy Jet motor setup.
Another great feature of your Bixpy Outboard Battery box is this handy USB charger port. It is a great feature for when your phone or tablet is running low on battery whether on water or land.
Keep in mind, the USB port is NOT water proof and you should keep it dry at all times and the output is only 1 amp, which means slow charges. This is to preserve your battery for use with your Bixpy Jet and primarily serves as an emergency charger.
The Bixpy J-1 Weed Guard is the perfect accessory if you use your Bixpy Jet in places where excess seaweed, small pebbles and other debris are present, which can damage the propeller housing and/or the propeller.
