NEW LAKE SIDE LOCATION!
Showing all 16 results
The Hoodoo Pedal Drive Adapter allows you to quickly add a Bixpy Motor to your Hoodoo Voyager 100P and Hoodoo Tempest 120P.
No drilling. No hassle. This simple swap of your foot pedal drive with your Bixpy Hoodoo Pedal Drive adapter allows you to take your kayaking to the next level with clean electric power.
* Motors shown in the pictures above are not included in the adapter kit
The DIY (Do It Yourself) ThruHull™ POD Adapter is the perfect DIY Adapter for the do-it-yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.
Click here to download a printable template for installing the Pod Adapter.
Make sure that you are getting the right Bixpy adapter for your watercraft, contact us if you’re not sure.
* Pods and motors in the pictures above are not included in the adapter kit
The Power Pole WillFit™ Adapter allows you to quickly and easily add a Bixpy Motor to your kayak using your standard Micro Power Pole adapter slot.
If your kayak accommodates a Micro Anchor Power Pole, you can simply screw this adapter onto your Power Pole in seconds – no tools required!
If your kayak is Power Pole ready, but requires a special mounting plate (i.e. some Hobie Pro Anglers, Wilderness Atak, Native Propel, etc.) you will need that mounting plate from your kayak manufacturer to make installation easier.
If your kayak does not have a power pole mount, this is still an excellent, stable option for mounting a Bixpy Motor to your kayak as long as you have a fairly flat area in the rear of your kayak to accommodate the adapter’s foot print. If you’re not sure, you can download the adapter’s outline by clicking here and trying it on your kayak.
NOTE: Pole Steering as shown in some of the pictures is NOT included in this adapter kit and can be purchased separately.
Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for saltwater or fresh water use
Click here for installation guides and videos
* Motors pictured not included in adapter kit. If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
With the Transom Adapter, you can attach your Bixpy Motor to virtually any watercraft with a flat vertical mounting surface in seconds. This includes most dinghies, some kayaks, personal pontoons and a variety of other watercraft. The aluminum pipe will adjust to accommodate virtually any depth to meet your needs.
This kit also includes a complete steering mechanism that will allow you to steer the motor for full control of your kayak.
Click here for installation guides and videos
If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
With the Universal Kayak Adapter, you can attach your Bixpy J-2 Motor to virtually any kayak, canoe or small watercraft. The aluminum pipes will adjust to accommodate virtually any length and configuration, and the mechanism includes an ingenious adjustment arm to accommodate a wide variety of slopes in the back of various watercraft.
As every kayak is slightly different in shape and configuration, you will have to do a little bit of installation with this adapter, but rest assured, this adapter ships complete with all the nuts and bolts you’ll need to get the job done. This is a more complex adapter, requiring higher levels of DIY ability, so it’s only recommended if none of our other Adapters fit your kayak and you’re comfortable taking on the task of installation or have access to a professional installer.
Click here for installation guides and videos
If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
The Vibe Bixpy-Ready Gravity Rudder is the first rudder in the market specifically designed to accept a motor as an option. The bottom portion of the rudder unscrews in seconds to allow you to attach your J-2 Motor directly onto the rudder.
The Vibe Bixpy-Ready Gravity Rudder offers a molded 10mm stainless steel pin that offers easy installation and not only fits all Vibe kayaks but can replace most other manufacturer rudders in seconds! It also offers a robust double hinged, 90° Slide & Stow mechanism that gets the rudder completely out of the water in a heartbeat!
The Vibe Bixpy-Ready Gravity Rudder also features a gravity driven locking mechanism that allows the rudder to lock into place when motorized in forward or reverse. However, since the locking only occurs with gravity, the rudder easily “unlocks” and pops up to protect your motor and rudder in shallow water. Steering your rudder can be done using your existing rudder steering system if you have one and if not, you can choose from a variety of options in our Steering Options.
Click here for installation guides and videos.
* Motors shown in pictures not included in adapter kits.
If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
No Drilling. No Hassle. This Pedal Drive Adapter clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power.
Make sure that you are getting the right Bixpy adapter for your watercraft by contacting us. This adapter will not fit Hobie 360 kayaks.
Now fits more kayaks including:
* Motors shown in the pictures above are not included in the adapter kit
No drilling. No holes. No hassle! The ThruHull Pod Adapter for Bonafide Kayaks clips into the Dry Pod opening of your Bonafide kayak in seconds.
The adapter comes with the original Bonafide Dry Pod, allowing you to store and quickly access your gear or personal items.
The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the Dry Pod and can continue to use it for its intended purpose as you motor in your Bonafide kayak.
This adapter also features a motor shield that protects the motor in case of a light impact.
Make sure that you are getting the right Bixpy adapter for your watercraft by contacting us.
Please note: Installation of a motor on the pod will not leave enough space for installing a transducer as intended.
* Motors shown in the above pictures are not included in the adapter kit
No drilling. No holes. No hassle! The ThruHull Pod Adapter for Feelfree Kayaks clips into the pod opening of your Feelfree kayak in seconds.
The adapter comes with the original Feelfree pod, allowing you to store and quickly access your gear or personal items.
The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the pod and can continue to use it for its intended purpose as you motor in your FeelFree kayak.
This ThruHull Pod Adapter for Feelfree Kayaks also features a motor shield that protects the motor in case of a light impact.
Make sure that you are getting the right Bixpy adapter for your watercraft by contacting us!
Please note: Installation of a motor on the pod will not leave enough space for installing a transducer as intended.
*Motors shown in pictures are not included in the Adapter Kits.
The QuickConnect Foot Steering Mounting & Control Kit is a custom-designed kit for mounting, steering, and retracting the Bixpy Motor on the NuCanoe Frontier 12 or the NuCanoe UNLIMITED. Take control with the QuickConnect Foot Steering Mounting and Control kit. Installs in seconds and lets you have full control over your propulsion with a flick of your foot. Hands-free kayaking is now a reality!
If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.
For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.
This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com
INSTALLATION GUIDES
Click here for installation guides and videos
* Motors shown in pictures not included in the Adapter Kits
If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.
For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.
This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com
INSTALLATION GUIDES
Click here for installation guides and videos
* Motors shown in pictures not included in the Adapter Kits
If your paddle board or kayak has a Flip and Lock Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.
If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Flip & Lock fin, this is what you’ll need.
Protection: Water-proof, dirt-proof and corrosion resistant components
INSTALLATION GUIDES
If your paddle board or kayak has a Slide & Lock (sometimes called a Standard Fin Plate), this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.
If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Slide & Lock fin, this is what you’ll need.
Protection: Water-proof, dirt-proof and corrosion resistant components
Click Here for installation and video guides
* Motors in pictures not included
If your paddle board or kayak has a US Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.
If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a new US SUP fin, this is what you’ll need.
Make sure that you are getting the right Bixpy fin for your fin box by visting our Contact page or via our Online Chat.
Protection: Water-proof, dirt-proof and corrosion resistant components
Water use: Marine grade stainless steel components for salt water or fresh water use
No holes, no kayak modifications and simple Plug and Play installation!
The Hobie Twist and Stow Rudder Adapter replaces your Hobie rudder with a Bixpy Rudder and enable you to attach your J-2 Motor to your kayak’s rudder assembly. Steering is done using your Hobie steering system.
Click here for installation guides and videos
* Please note, this rudder adapter is ONLY compatible with Hobie Twist and Stow rudders. That includes: Hobie Sport Kayaks, Hobie Revolution Kayaks, Hobie Outbacks (pre 2019) and Hobie Oasis Kayaks.
** Not recommended on Inflatable Hobie Kayaks and this adapter won’t fit Hobie Pro Angler, Passport, Compass, 2019+ Outbacks and Island Series kayaks.
† This adapter blade will NOT work with J-1 Motors
Motors and batteries in pictures not include in adapter price. Some pictures may have other models illustrated.
If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!
This is a great tool for pod mounts on kayaks or a variety of other applications where you need to vertically attach the Bixpy Motor to a flat surface.
If you have a J-2 Motor, this adapter will simply attach directly to your J-2 motor. J-1 Motors will require a Standard Attachment to adapt to the motor before attaching this adapter.
End of content
End of content
No products in the cart.
