Vibe Standing Perch
$119.99The unique and optional Summit Seat Standing Perch is a Vibe accessory to the Summit Seat which attaches to the back of the seat to offer kayak sight fishermen a…
Small Accessories $10 in state $15 OOS
Class for small accessories – $10 in state, $15 out of state.
Showing 65–80 of 109 results
-
-
Dive Blu3 Nomad Dive System Fast Charger
$98.99Discover the convenience and efficiency of the Dive Blu3 Nomad Dive System Fast Charger.
Fast Charger:
- Charges BLU3 Nomad batteries in only 90 minutes (1 hour and 30 minutes)
- 110/220 compatible
- Reduces charging time by approximately 50% compared to standard chargers
Fast Charging vs. Slow Charging:
Fast chargers utilize higher charging currents to replenish the battery’s energy at a quicker rate, significantly reducing charging time. However, this accelerated charging process can generate more heat within the battery. This may impact long-term battery health if used excessively.
On the other hand, slow chargers, or standard chargers, employ lower charging currents, resulting in a gentler and more gradual charging process. While slow charging may take longer to complete, it imposes less stress on the battery cells and helps maintain overall battery health over time.
Select options This product has multiple variants. The options may be chosen on the product page -
Dive Blu3 Nomad Mini Dive System Standard Charger
$30.00Discover the convenience and efficiency of BLU3 Chargers. Choose between the Standard Charger for reliable charging or upgrade to the Fast Charger for rapid recharging times.
Dive Blu3 Nomad Mini Dive System Standard Charger:
- Charges BLU3 Nemo and Mini batteries in approximately 3 hours
- 110/220 compatible
Fast Charger:
- Charges BLU3 Nemo and Mini batteries in just 100 minutes (1 hour and 40 minutes).
- 110/220 compatible
- Reduces charging time by approximately 50% compared to standard chargers
Battery Health and Charging Efficiency:
When it comes to maintaining optimal battery health for your BLU3 dive systems, understanding the charging options is essential. While Fast Chargers offer the convenience of rapid recharging times, it’s important to balance speed with battery longevity.
Fast Charging vs. Slow Charging:
Fast chargers utilize higher charging currents to replenish the battery’s energy at a quicker rate, significantly reducing charging time. However, this accelerated charging process can generate more heat within the battery, which may impact long-term battery health if used excessively.
On the other hand, slow chargers, or standard chargers, employ lower charging currents, resulting in a gentler and more gradual charging process. While slow charging may take longer to complete, it imposes less stress on the battery cells and helps maintain overall battery health over time.
Select options This product has multiple variants. The options may be chosen on the product page -
Vibe Versa Pod
$119.99The Vibe Versa Pod is versatility defined. Huge weather-tight storage, magnetic tackle tray, quick-access cargo bungee tie down & more! With the Versa Pod you can make sure you don’t have…
-
Vibe Shearwater 125 Steering Handle
$34.99The Shearwater 125 steering handle provides a hand steering option to use with the Vibe X-Drive Pedal Kit and Bixpy Jet Motor.
-
Vibe Versa Drawer Mesh Cover
$14.99The Vibe Versa Mesh Drawer Cover is the perfect accessory for keeping all those loose, need-to-get-to-quick gear, tackle and tools safe and secure when stored in the Vibe Versa Drawer under the Vibe Summit Seat. The durable mesh fabric keeps the items safe, while also allowing easy access whenever you need anything.
-
Vibe Phantom Grip Handles (2 PK)
$12.99Vibe’s new Phantom Grip Handles are specifically designed with the kayaker in mind. The wider grip allows for better weight distribution and eliminates pinch points while the heavy-duty rubber underlay allows for better grip and softens the load.
-
Backwater Assassin Carbon Fiber Hybrid Paddle
$157.99MEET THE ASSASSIN
The Backwater Assassin Carbon Fiber Hybrid Paddle is the full-size version of its legendary predecessor, the Assault Hand Paddle. Weighing right at 42 ounces, paddle design and technology is again moving forward!
Measuring 250-260cm (98.5-102.5) – It is adjustable for comfort.
Note* – Due to its length, this item incurs an oversized item shipping charge of $7.00. This charge will be added to your cart at checkout.
-
Vibe Evolve 230-250cm Fiberglass Paddle
$139.99The Vibe Evolve Paddle features a dihedral angle blade for a more efficient pull through the water and a large powerful blade face to get you moving quickly. It adjusts from 230 cm to 250 cm making it ideal for fishing kayaks with adjustable height seats or solo canoe paddling.
Select options This product has multiple variants. The options may be chosen on the product page -
Railblaza Rod Holder Extender
$14.99The RAILBLAZA Rod Holder Extender will fit any of our rod holders, allowing 5 inches of extension. It gives full adjustability allowing the rod holder to be extended outwards or conveniently position your rod holder closer to you on your kayak.
-
Sale!
Railblaza Starport HD & Rod Holder II Kit
Original price was: $32.99.$29.99Current price is: $29.99.The Railblaza Starport HD & Rod Holder II Kit gives you the ability to quickly install a rod holder anywhere on your boat or kayak. When you purchase the Railblaza Starport HD & Rod Holder II Kit, it will come with the stainless steel hardware you need for mounting. This is a stylish, four screw base mount, which comes with the popular Railblaza locking slide, and is lower in profile than others on the market.
• Kit comes with Rod Holder II and Starport HD• Rear gimble lock reduces rod rotation for compatible rods• Fully adjustable 360 degrees around, over 90 degrees vertical• Starport HD allows users to fit and swap out the full range of Railblaza accessories• Stainless steel mounting hardware included -
Railblaza Rod Holder II with Miniport Tracmount
$36.00The RAILBLAZA Rod Holder II with MiniPort TracMount is the go-to solution when you need serious rod control in a small-track setup. Built for anglers who demand adjustability and rock-solid hold, this rig fits spinning, baitcasting, and fly rods with full vertical tilt and 360° rotation. The locking collar keeps your rod from skipping town on a hard hit, while the MiniPort TracMount base slides right into most kayak and boat track systems—no drilling, no tools, no drama. It’s compact, clean, and designed for tight decks and fast installs. Whether you’re trolling weedlines, soaking bait, or running light tackle in current, this setup keeps your rod locked in and ready for action. UV-stabilized, salt-tough, and built like every inch matters—because on a kayak, it does.
-
Vibe 3lb Grapnel Anchor and 30ft Rope
$49.99Catch the big fish while anchored with the our Complete 3lb Grapnel Anchor Kit. The 3.3 lb (1.5 kg) galvanized steel anchor features four 6-inch tines that fold out of the way while stored for space maximization and easily release when ready for use. The heavy head design of the anchor creates less wait time until the anchor is fully submerged into the anchoring surface on deeper and faster moving water. The boat anchor system is galvanized to protect and prevent against rust and corrosion. The durable nylon storage case is padded for additional protection and also dampens noise while the anchor is stowed.
-
Vibe Anchor Trolley and 3lb Grapnel Anchor Bundle
$49.99No need to worry about currents or winds with the Vibe Anchor Trolley and 3lb Grapnel Anchor Bundle. This bundle keeps you where you want to be while fishing in the anchored position. Using a nylon pulley system, the anchor trolley allows you to adjust the position based on winds and water currents. Once you find your sweet spot, the mini zig zag cleat locks the rope in place.
-
C-Tug SandTrakz Kayak Cart
$172.99The C-Tug SandTrakz Kayak Cart is setting new standards with its sophisticated style and precision design. C-Tug SandTrakz is the most versatile and durable kayak cart on the market. It carries up to 80kg (170lbs), won’t rust, and dismantles for easy stowing.
-
DIY Fin Adapter for Inflatables (K-1 & J-2 Motors)
$69.00PRODUCT DESCRIPTION
If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.
For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.
This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com
INCLUDES
- Inflatable Fin Box – Adapter
- Bixpy Slide & Lock Fin Adapter
- All hardware required
ADDITIONAL INFORMATION
- Additional features: Easily attached to your Bixpy Motor
- Motor draft: 6″ (15 cm)
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use
INSTALLATION GUIDES
Click here for installation guides and videos
* Motors shown in pictures not included in the Adapter Kits
If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.
For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.
This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com
INCLUDES
- Inflatable Fin Box – Adapter
- Bixpy Slide & Lock Fin Adapter
- All hardware required
ADDITIONAL INFORMATION
- Additional features: Easily attached to your Bixpy Motor
- Motor draft: 6″ (15 cm)
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use
INSTALLATION GUIDES
Click here for installation guides and videos
* Motors shown in pictures not included in the Adapter Kits
End of content
End of content