DIY Fin Adapter for Inflatables J-2 Motors 3
DIY Fin Adapter for Inflatables (J-2 Motors)

PRODUCT DESCRIPTION

If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.

For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.

This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com

INCLUDES

  • Inflatable Fin Box – Adapter
  • Bixpy Slide & Lock Fin Adapter
  • All hardware required

ADDITIONAL INFORMATION

  • Additional features: Easily attached to your Bixpy Motor
  • Motor draft: 6″ (15 cm)
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use

INSTALLATION GUIDES 

Click here for installation guides and videos

 

* Motors shown in pictures not included in the Adapter Kits

If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.

For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.

This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com

INCLUDES

  • Inflatable Fin Box – Adapter
  • Bixpy Slide & Lock Fin Adapter
  • All hardware required

ADDITIONAL INFORMATION

  • Additional features: Easily attached to your Bixpy Motor
  • Motor draft: 6″ (15 cm)
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use

INSTALLATION GUIDES 

Click here for installation guides and videos

 

* Motors shown in pictures not included in the Adapter Kits

not rated $65.00 Add to cart
Bixpy Hobie Rudder Adapter
Bixpy Hobie® Rudder Adapter (J-1)

If you already have your Bixpy Jet from another kit and would like to use it in your Hobie kayaks and replace your rudder, this is what you’ll need. Don’t forget, if you don’t have a Bixpy Outdoor Battery Box, you’ll need to get one of those as well. Your battery pack comes with a remote control.

INCLUDES

  • Bixpy Hobie® Rudder Adapter
  • All hardware required to attach to kayaks and canoes
  • Wire to run to your Bixpy Battery Box
not rated $129.00 Add to cart
Bixpy Universal Kayak & Canoe Adapter (J-1)
Bixpy Universal Kayak & Canoe Adapter (J-1)

With the Bixpy Universal Kayak & Canoe Adapter, you can attach your Bixpy Jet to virtually any kayak, canoe or similar watercraft. The aluminum pipes will adjust to accommodate virtually any length, and the mechanism includes an ingenious adjustment arm to accommodate a wide variety of slopes in the back of various kayaks.  

As every kayak is slightly different in shape and configuration, you will have to do a little bit of installation with this adapter, but rest assured, the Bixpy Universal Kayak & Canoe Adapter comes complete with all the nuts and bolts you’ll need and complete instructions.

BIXPY PERFORMANCE

screen-shot-2018-09-28-at-12.14.54-pm-2.png

INCLUDES

  • Bixpy Universal Kayak & Canoe Adapter
  • All hardware required to attach to kayaks and canoes
  • Wire to run to your Bixpy Outboard Power Pack
  • Instructions sheets
not rated $139.00 Add to cart
Bixpy for Inflatables Adapter
Bixpy for Inflatables Adapter (J-1)

If you already have your Bixpy Jet from another kit and would like to attach your motor to your inflatable kayak, this is what you’ll need. Don’t forget, if you don’t have a Bixpy Outdoor Battery Box, you’ll need to get one of those as well. Your battery pack comes with a remote control.

INCLUDES

  • Bixpy Inflatable Adapter (For Inflatable Kayaks or iSUP’s that don’t have removable fin boxes)
  • All hardware required
  • Wire to run to your Bixpy Battery Box
not rated $119.00 Add to cart
Bixpy Universal Transom Adapter
Bixpy Universal Transom Adapter (J-1)

With the Bixpy Universal Transom Adapter, you can attach your Bixpy Jet to virtually any watercraft with a flat vertical mounting surface. This includes most dinghies, some kayaks, personal pontoons and a variety of other watercraft. The aluminum pipe will adjust to accommodate virtually any depth to meet your needs.

This kit also includes a complete steering mechanism that will allow you to steer the motor for full control of your kayak. The shaft holding the motor also features a “kick-up” mechanism that will allow the motor to release and swing if it hits bottom.

FEATURES

  • Fits visually any transom plate
  • Adjustable depth
  • Quick release disassembly
  • Adjustable trim
  • Super sturdy construction

INCLUDES

  • Bixpy Universal Transom Adapter
  • All hardware required to attach to dinghies, kayaks, personal pontoons and a variety of other watercraft
  • Wire to run to your Bixpy Battery Box
  • Tiller Steering Handle (2 sizes – 12″ and 24″ included)
  • One Rubber grip for tiller handle

 

not rated $189.00 Add to cart
Sold
Bixpy 12V Auxiliary Cable
Bixpy 12V Auxiliary Cable

Expected release date is March 2017

Your Bixpy Outboard Battery Box has a 12V outlet for you to plug in your fish finder or other 12V electronics. This cable allows you to do just that and keep everything water tight.

INCLUDES

  • Waterproof connector with cap
  • 6′ double core cable
  • Bare positive(red)/negative(black) tips
not rated $12.99 Read more
5V USB Charger Cable
5V USB Charger Cable

Another great feature of your Bixpy Outboard Battery box is this handy USB charger port. It is a great feature for when your phone or tablet is running low on battery whether on water or land.

Keep in mind, the USB port is NOT water proof and you should keep it dry at all times and the output is only 1 amp, which means slow charges. This is to preserve your battery for use with your Bixpy Jet and primarily serves as an emergency charger.

INCLUDES

  • Waterproof connector with cap
  • 6″ USB cable
  • Connector cap for when not in use
not rated $16.99 Add to cart