DIY ThruHull Pod Adpater (J-2 Motors)
DIY (Do It Yourself) ThruHull POD Adapter (J-2 Motors)

PRODUCT DESCRIPTION

The DIY (Do It Yourself) ThruHull POD Adapter is the perfect DIY Adapter for the do it yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.

Click here to download a printable template for installing the Pod Adpater.

Please note: Pods in pictures shown are for illustration purposes only and not included.

FEATURES

  • Sturdy and stable adapter with all parts included for easy installation
  • Seales to keep the pod dry
  • Weighs less than 2 lbs
  • Dry pod not included
  • Motor shield to protect the motor in case of accidental collision with bottom

INCLUDES

  • DIY (Do It Yourself) ThruHull™ POD Adapter kit with all hardware

ADDITIONAL INFORMATION

  • Motor draft: 10″ (25 cm) from bottom of kayak to bottom of motor
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components
  • Water use: Marine grade stainless steel components for salt water or fresh water use
  • If you require a reduced shroud to inserts , click here to add one to your cart

* Pods and Motors shown in pictures not included in the Adapter Kits. If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.

not rated $99.00 Add to cart
DIY Fin Adapter for Inflatables J-2 Motors 3
DIY Fin Adapter for Inflatables (J-2 Motors)

PRODUCT DESCRIPTION

If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.

For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.

This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com

INCLUDES

  • Inflatable Fin Box – Adapter
  • Bixpy Slide & Lock Fin Adapter
  • All hardware required

ADDITIONAL INFORMATION

  • Additional features: Easily attached to your Bixpy Motor
  • Motor draft: 6″ (15 cm)
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use

INSTALLATION GUIDES 

Click here for installation guides and videos

 

* Motors shown in pictures not included in the Adapter Kits

If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.

For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.

This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com

INCLUDES

  • Inflatable Fin Box – Adapter
  • Bixpy Slide & Lock Fin Adapter
  • All hardware required

ADDITIONAL INFORMATION

  • Additional features: Easily attached to your Bixpy Motor
  • Motor draft: 6″ (15 cm)
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use

INSTALLATION GUIDES 

Click here for installation guides and videos

 

* Motors shown in pictures not included in the Adapter Kits

not rated $54.99 Add to cart
Flip and Lock Fin Adapter J-1 and J2 Motors
Flip and Lock Fin Adapter (J-1 and J2 Motors)

PRODUCT DESCRIPTION

If your paddle board or kayak has a Flip and Lock Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.

If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Flip & Lock fin, this is what you’ll need.

 

INCLUDES

  • Flip & Lock Fin Adapter
  • Locking tab and leash

ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant components
INSTALLATION GUIDES

Click here for installation guides and videos.
* Motor in pictures not included
not rated $29.99 Add to cart
Slide and Lock Fin J-1 and J-2 Motors
Slide and Lock Fin (J-1 and J-2 Motors)

PRODUCT DESCRIPTION

If your paddle board or kayak has a Slide & Lock (sometimes called a Standard Fin Plate), this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.

If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Slide & Lock fin, this is what you’ll need.

 

INCLUDES

  • Flip & Lock Fin Adapter
  • Locking tab and leash

ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant components

INSTALLATION GUIDES:

Click Here for installation and video guides

 

* Motors in pictures not included

not rated $29.99 Add to cart
Hobie Pro Angler Compass Outback Power Pole Adapter J-2 Motors
Hobie Pro Angler / Compass / Outback Power Pole Adapter (J-2 Motors)

PRODUCT DESCRIPTION

The Hobie® Pro Angler / Compass / Outback† Adapter allows you to quickly and easily add a Bixpy Motor to your kayak using your standard Micro Power Pole hole adapter slot.

2019 or newer Hobie® Outbacks already have the screw inserts to accommodate this adapter – so all you need is the adapter. However, for Pro Angler and Compass kayaks, you will need to purchase a Hobie Power Pole Plate before installing this adapter.

FEATURES

  • Quick release for getting on and off the water quickly
  • Hinge that allows the motor to lift completely out of the water
  • 8″ to 13″ from bottom of plate to bottom of motor – it is recommended that the bottom of your motor be about 3″ to 5″ below the waterline and more in choppy water as necessary
  • 270° of rotational trim – adapter ships with set screws in place. To achieve steering, set screws must be removed.

INCLUDES

  • Hobie® Pro Angler / Compass WillFit™ Power Pole Adapter
  • All hardware required to attach to Power Pole ready kayaks
  • Pole Steering piece illustrated NOT included
  • Hobie® Compass Power Pole Mounting Plate & Hobie® Pro Angler Power Pole Mounting Plate NOT included

ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for salt water or fresh water use

INSTALLATION GUIDES 

Click here for installation guides and videos

NOTES

Pole Steering as shown in some of the pictures is NOT included in this adapter kit and is sold separately.
** Hobie® Power Pole Adapter not included in kit and must be purchased separately.
† This adapter will not work on Hobie® Outbacks built before 2019 . Your other options for older Hobie Outbacks are: the Mirage Pedal Adapter or the Twist & Stow Rudder Adapter

not rated $189.00 Add to cart
Flat Surface Bracket J-1 and J-2 Motors
Flat Surface Bracket (J-1 and J-2 Motors)

PRODUCT DESCRIPTION

The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!

This is a great tool for pod mounts on kayaks or a variety of other applications where you need to vertically attach the Bixpy Motor to a flat surface.

If you have a J-2 Motor, this adapter will simply attach directly to your J-2 motor. J-1 Motors will require a Standard Attachment to adapt to the motor before attaching this adapter.

not rated $19.99 Add to cart
Bixpy Hobie Rudder Adapter
Bixpy Hobie® Rudder Adapter (J-1)

If you already have your Bixpy Jet from another kit and would like to use it in your Hobie kayaks and replace your rudder, this is what you’ll need. Don’t forget, if you don’t have a Bixpy Outdoor Battery Box, you’ll need to get one of those as well. Your battery pack comes with a remote control.

INCLUDES

  • Bixpy Hobie® Rudder Adapter
  • All hardware required to attach to kayaks and canoes
  • Wire to run to your Bixpy Battery Box
not rated $129.00 Add to cart
Bixpy Universal Kayak & Canoe Adapter
Bixpy Universal Kayak & Canoe Adapter (J-1)

With the Bixpy Universal Kayak & Canoe Adapter, you can attach your Bixpy Jet to virtually any kayak, canoe or similar watercraft. The aluminum pipes will adjust to accommodate virtually any length, and the mechanism includes an ingenious adjustment arm to accommodate a wide variety of slopes in the back of various kayaks.  

As every kayak is slightly different in shape and configuration, you will have to do a little bit of installation with this adapter, but rest assured, the Bixpy Universal Kayak & Canoe Adapter comes complete with all the nuts and bolts you’ll need and complete instructions.

BIXPY PERFORMANCE

screen-shot-2018-09-28-at-12.14.54-pm-2.png

INCLUDES

  • Bixpy Universal Kayak & Canoe Adapter
  • All hardware required to attach to kayaks and canoes
  • Wire to run to your Bixpy Outboard Power Pack
  • Instructions sheets
not rated $139.00 Add to cart
Bixpy for Inflatables Adapter
Bixpy for Inflatables Adapter (J-1)

If you already have your Bixpy Jet from another kit and would like to attach your motor to your inflatable kayak, this is what you’ll need. Don’t forget, if you don’t have a Bixpy Outdoor Battery Box, you’ll need to get one of those as well. Your battery pack comes with a remote control.

INCLUDES

  • Bixpy Inflatable Adapter (For Inflatable Kayaks or iSUP’s that don’t have removable fin boxes)
  • All hardware required
  • Wire to run to your Bixpy Battery Box
not rated $119.00 Add to cart
Bixpy Universal Transom Adapter
Bixpy Universal Transom Adapter (J-1)

With the Bixpy Universal Transom Adapter, you can attach your Bixpy Jet to virtually any watercraft with a flat vertical mounting surface. This includes most dinghies, some kayaks, personal pontoons and a variety of other watercraft. The aluminum pipe will adjust to accommodate virtually any depth to meet your needs.

This kit also includes a complete steering mechanism that will allow you to steer the motor for full control of your kayak. The shaft holding the motor also features a “kick-up” mechanism that will allow the motor to release and swing if it hits bottom.

FEATURES

  • Fits visually any transom plate
  • Adjustable depth
  • Quick release disassembly
  • Adjustable trim
  • Super sturdy construction

INCLUDES

  • Bixpy Universal Transom Adapter
  • All hardware required to attach to dinghies, kayaks, personal pontoons and a variety of other watercraft
  • Wire to run to your Bixpy Battery Box
  • Tiller Steering Handle (2 sizes – 12″ and 24″ included)
  • One Rubber grip for tiller handle

 

not rated $189.00 Add to cart
Bixpy 12V Auxiliary Cable
Bixpy 12V Auxiliary Cable

Expected release date is March 2017

Your Bixpy Outboard Battery Box has a 12V outlet for you to plug in your fish finder or other 12V electronics. This cable allows you to do just that and keep everything water tight.

INCLUDES

  • Waterproof connector with cap
  • 6′ double core cable
  • Bare positive(red)/negative(black) tips
not rated $12.99 Add to cart
5V USB Charger Cable
5V USB Charger Cable

Another great feature of your Bixpy Outboard Battery box is this handy USB charger port. It is a great feature for when your phone or tablet is running low on battery whether on water or land.

Keep in mind, the USB port is NOT water proof and you should keep it dry at all times and the output is only 1 amp, which means slow charges. This is to preserve your battery for use with your Bixpy Jet and primarily serves as an emergency charger.

INCLUDES

  • Waterproof connector with cap
  • 6″ USB cable
  • Connector cap for when not in use
not rated $16.99 Add to cart