Bixpy Base Outboard Kit J-2
Bixpy Base Outboard Kit J-2
The Bixpy J-2 Outboard Kit is Bixpy’s second major iteration to its, now famous, jet propulsion system that has motorized thousands of kayaks, paddle boards, dinghies, float-tubes and all kinds of personal water craft over the last 4 years.This kit combines the awesome power of the new Bixpy J-2 Motor with the finely tuned, waterproof, wireless PP-378 Outboard Battery to power virtually any personal watercraft on the market.Whether you want to motorize your kayak, canoe, paddleboard, float-tube, dinghy, inflatable pack-raft, or any number of other small watercraft, the Bixpy Outboard Kit is your answer.There is nothing else on the market made so specifically to give water enthusiasts an ultra-light and super adaptable package to power their boats.In addition to the motor and battery, you have a large array of Bixpy’s Plug & Play Bixpy Adapters to choose from to make installation on hundreds of small and large brand name boats a snap!Not sure which adapter best fits your watercraft? Easily find the right Bixpy adapter for your watercraft on www.bixpy.infoThe Bixpy Outboard Kit enables you to stay out longer, explore new waters, fish more, troll for hours or just get home effortlessly at the end of a long tiring day on the water or when the weather turns on you and you need an extra push to get you back.

 

Bixpy Outboard Kit J-2 Speed Table 2 Bixpy Outboard Kit J-2 Speed Table 1

not rated $1,199.00 Add to cart
Bixpy PP-166 Power Bank
Bixpy PP-166 Power Bank

The first truly waterproof and rugged power bank for the outdoors

If you prefer taking care of your equipment instead of your power bank, we have the answer for you. The Bixpy PP-166 Power Bank is the ultimate rugged, powerful, waterproof Power Bank for all of your outdoor needs. Whether you need to run your fish finder, light up your campsite, keep your mini-fridge running or charge your phones, cameras and tablets, the Bixpy PP-166 Power Bank will provide you with hours of power for all of your personal toys. It’s so powerful, you can even plug in an inverter and run 110V to 240V devices up to 150 watts!

The Bixpy PP-166 Power Bank offers 166Wh of power using LiFepO4 cells that provide superior life and a near perfect 12V output through the entire discharge cycle of the battery. The Bixpy PP-166 Power Bank shell is made of specially sourced ABS-PC plastic formulation with UV protection injected into the plastic to protect it from the elements in addition to a waterproof seal that can withstand depths in excess of 100 feet.

To make it even more robust, you can charge the Bixpy PP-166 Power Bank in about 8 hours with the Bixpy SUN45 Waterproof Solar Panel, an optional, waterproof, folding 45 watt solar panel.

NOTE: This battery will NOT run the Bixpy J1 PowerShroud Motor. 

 

not rated $289.00 Add to cart
Hobie Mirage, Vibe X-Drive, Pelican HD, Lightening J-2 Motors
Hobie® Mirage, Vibe X-Drive, Pelican HD, Lightening (J-2 Motors)

PRODUCT DESCRIPTION

No Drilling. No Hassle. This Pedal Drive Adapter clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power.

FEATURES

  • Now fits more kayaks including all roto-molded Hobie® kayaks, Inflatable Hobie® kayaks, Vibe Kayaks, Pelican Kayaks and Lightening Kayaks. Please note that this adapter does not fit the new Hobie® MirageDrive 360.

INCLUDES

  • Pedal Drive Adapter
  • Bixpy Propeller Housing with reduced width for a better fit (required for most kayaks)

ADDITIONAL INFORMATION

  • Cable length from motor connector end to battery connector end (including blue pipe): 6 feet (1.85 m)
  • Thruster draft: 12″ (30.5 cm) from bottom of kayak to bottom of motor
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components
  • Water use: Marine grade stainless steel components for salt water or fresh water use

INSTALLATION GUIDES 

Click here for installation guides and videos

NOTES: 

This adapter will not fit Hobie 360 Kayaks.

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.

not rated $149.00 Add to cart
DIY ThruHull Pod Adpater (J-2 Motors)
DIY (Do It Yourself) ThruHull POD Adapter (J-2 Motors)

PRODUCT DESCRIPTION

The DIY (Do It Yourself) ThruHull POD Adapter is the perfect DIY Adapter for the do it yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.

Click here to download a printable template for installing the Pod Adpater.

Please note: Pods in pictures shown are for illustration purposes only and not included.

FEATURES

  • Sturdy and stable adapter with all parts included for easy installation
  • Seales to keep the pod dry
  • Weighs less than 2 lbs
  • Dry pod not included
  • Motor shield to protect the motor in case of accidental collision with bottom

INCLUDES

  • DIY (Do It Yourself) ThruHull™ POD Adapter kit with all hardware

ADDITIONAL INFORMATION

  • Motor draft: 10″ (25 cm) from bottom of kayak to bottom of motor
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components
  • Water use: Marine grade stainless steel components for salt water or fresh water use
  • If you require a reduced shroud to inserts , click here to add one to your cart

* Pods and Motors shown in pictures not included in the Adapter Kits. If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.

not rated $99.00 Add to cart
DIY Fin Adapter for Inflatables J-2 Motors 3
DIY Fin Adapter for Inflatables (J-2 Motors)

PRODUCT DESCRIPTION

If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.

For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.

This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com

INCLUDES

  • Inflatable Fin Box – Adapter
  • Bixpy Slide & Lock Fin Adapter
  • All hardware required

ADDITIONAL INFORMATION

  • Additional features: Easily attached to your Bixpy Motor
  • Motor draft: 6″ (15 cm)
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use

INSTALLATION GUIDES 

Click here for installation guides and videos

 

* Motors shown in pictures not included in the Adapter Kits

If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.

For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.

This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact your boat maker for the best advice or reach out to us and we’ll do our best to help at: info@esurfsports.com

INCLUDES

  • Inflatable Fin Box – Adapter
  • Bixpy Slide & Lock Fin Adapter
  • All hardware required

ADDITIONAL INFORMATION

  • Additional features: Easily attached to your Bixpy Motor
  • Motor draft: 6″ (15 cm)
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use

INSTALLATION GUIDES 

Click here for installation guides and videos

 

* Motors shown in pictures not included in the Adapter Kits

not rated $54.99 Add to cart
Flip and Lock Fin Adapter J-1 and J2 Motors
Flip and Lock Fin Adapter (J-1 and J2 Motors)

PRODUCT DESCRIPTION

If your paddle board or kayak has a Flip and Lock Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.

If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Flip & Lock fin, this is what you’ll need.

 

INCLUDES

  • Flip & Lock Fin Adapter
  • Locking tab and leash

ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant components
INSTALLATION GUIDES

Click here for installation guides and videos.
* Motor in pictures not included
not rated $29.99 Add to cart
Slide and Lock Fin J-1 and J-2 Motors
Slide and Lock Fin (J-1 and J-2 Motors)

PRODUCT DESCRIPTION

If your paddle board or kayak has a Slide & Lock (sometimes called a Standard Fin Plate), this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.

If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Slide & Lock fin, this is what you’ll need.

 

INCLUDES

  • Flip & Lock Fin Adapter
  • Locking tab and leash

ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant components

INSTALLATION GUIDES:

Click Here for installation and video guides

 

* Motors in pictures not included

not rated $29.99 Add to cart
US Fin Adapter J-1 and J-2 Motors
US Fin Adapter (J-1 and J-2 Motors)

PRODUCT DESCRIPTION

If your paddle board or kayak has a US Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes.

If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a new US SUP fin, this is what you’ll need.

Make sure that you are getting the right Bixpy fin for your fin box by visting our Contact page or via our Online Chat.

INCLUDES

  • Bixpy US SUP Fin
  • All stainless steel hardware required to attach the fin to your fin box

ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant components
Water use: Marine grade stainless steel components for salt water or fresh water use

* Motors in pictures not included. If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.
not rated $29.99 Add to cart
Hobie Pro Angler Compass Outback Power Pole Adapter J-2 Motors
Hobie Pro Angler / Compass / Outback Power Pole Adapter (J-2 Motors)

PRODUCT DESCRIPTION

The Hobie® Pro Angler / Compass / Outback† Adapter allows you to quickly and easily add a Bixpy Motor to your kayak using your standard Micro Power Pole hole adapter slot.

2019 or newer Hobie® Outbacks already have the screw inserts to accommodate this adapter – so all you need is the adapter. However, for Pro Angler and Compass kayaks, you will need to purchase a Hobie Power Pole Plate before installing this adapter.

FEATURES

  • Quick release for getting on and off the water quickly
  • Hinge that allows the motor to lift completely out of the water
  • 8″ to 13″ from bottom of plate to bottom of motor – it is recommended that the bottom of your motor be about 3″ to 5″ below the waterline and more in choppy water as necessary
  • 270° of rotational trim – adapter ships with set screws in place. To achieve steering, set screws must be removed.

INCLUDES

  • Hobie® Pro Angler / Compass WillFit™ Power Pole Adapter
  • All hardware required to attach to Power Pole ready kayaks
  • Pole Steering piece illustrated NOT included
  • Hobie® Compass Power Pole Mounting Plate & Hobie® Pro Angler Power Pole Mounting Plate NOT included

ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for salt water or fresh water use

INSTALLATION GUIDES 

Click here for installation guides and videos

NOTES

Pole Steering as shown in some of the pictures is NOT included in this adapter kit and is sold separately.
** Hobie® Power Pole Adapter not included in kit and must be purchased separately.
† This adapter will not work on Hobie® Outbacks built before 2019 . Your other options for older Hobie Outbacks are: the Mirage Pedal Adapter or the Twist & Stow Rudder Adapter

not rated $189.00 Add to cart
Power Pole Adapter J-2 Motors
Power Pole Adapter (J-2 Motors)

The Power Pole WillFit™ Adapter allows you to quickly and easily add a Bixpy Motor to your kayak using your standard Micro Power Pole adapter slot.

If your kayak accommodates a Micro Anchor Power Pole, you can simply screw this adapter onto your Power Pole in seconds – no tools required!

If your kayak is Power Pole ready, but requires a special mounting plate (i.e. some Hobie Pro Anglers, Wilderness Atak, Native Propel, etc.) you will need that mounting plate from your kayak manufacturer to make installation easier.

If your kayak does not have a power pole mount, this is still an excellent, stable option for mounting a Bixpy Motor to your kayak as long as you have a fairly flat area in the rear of your kayak to accommodate the adapter’s foot print.  If you’re not sure, you can download the adapter’s outline by clicking here and trying it on your kayak.

 

NOTE: Pole Steering as shown in some of the pictures is NOT included in this adapter kit and can be purchased separately. 

FEATURES

  • Quick release for getting on and off the water quickly
  • Hinge that allows the motor to lift completely out of the water
  • 9.5″ to 14.5″ from bottom of plate to bottom of motor – it is recommended that the bottom of your motor be about 3″ to 5″ below the waterline and more in choppy water as necessary
  • 270° of rotational trim – adapter ships with set screws in place. To achieve steering, set screws must be removed.

INCLUDES

  • Bixpy Power Pole Adapter
  • All hardware required to attach to Power Pole ready kayaks
  • Pole Steering Adapter Adapter illustrated NOT included and sold separately

ADDITIONAL INFORMATION

Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for saltwater or fresh water use

INSTALLATION GUIDES 

Click here for installation guides and videos

* Motors pictured not included in adapter kit. If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.

not rated $189.00 Add to cart
Hobie Twist and Stow Rudder Adapter J-2 Motors
Hobie Twist and Stow Rudder Adapter (J-2 Motors)

PRODUCT DESCRIPTION

No holes, no kayak modifications and simple Plug and Play installation!

The Hobie Twist and Stow Rudder Adapter replaces your Hobie rudder with a Bixpy Rudder and enable you to attach your J-2 Motor to your kayak’s rudder assembly. Steering is done using your Hobie steering system.

INCLUDES

  • Hobie Twist and Stow Rudder blade
  • All hardware required will be on your existing Hobie Rudder

ADDITIONAL INFORMATION

  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components

INSTALLATION GUIDES 

Click here for installation guides and videos

* Please note, this rudder adapter is ONLY compatible with Hobie Twist and Stow rudders. That includes: Hobie Sport Kayaks, Hobie Revolution Kayaks, Hobie Outbacks (pre 2019) and Hobie Oasis Kayaks.
** Not recommended on Inflatable Hobie Kayaks and this adapter won’t fit Hobie Pro Angler, Passport, Compass, 2019+ Outbacks and Island Series kayaks.
† This adapter blade will NOT work with J-1 Motors

Motors and batteries in pictures not include in adapter price. Some pictures may have other models illustrated.

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.

not rated $49.99 Add to cart
ThruHull Pod Adapter - Bonafide Kayaks J-2 Motors 4
ThruHull Pod Adapter – Bonafide Kayaks (J-2 Motors)

PRODUCT DESCRIPTION

No Drilling. No holes. No hassle!

The ThruHull Pod Adapter for Bonafide Kayaks clips into the Dry Pod opening of your Bonafide kayak in seconds.

The adapter comes with the original Bonafide Dry Pod, allowing you to store and quickly access your gear or personal items.

The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the Dry Pod and can continue to use it for its intended purpose as you motor in your Bonafide kayak.

This adapter also features a motor shield that protects the motor in case of a light impact.

Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.

FEATURES

  • Quick and easy installation
  • Works with SS107 & SS127
  • Sealed to keep the pod dry
  • Weighs less than 4lbs
  • Original Bonafide Dry Pod

INCLUDES

  • ThruHull Pod Adapter for Bonafide Kayaks
  • Bixpy Propeller Housing with reduced width for a better fit

ADDITIONAL INFORMATION

  • Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components
  • Water use: Marine grade stainless steel components for salt water or fresh water use

INSTALLATION GUIDES 

Click here for installation guides and videos.

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.

not rated $199.00 Add to cart
ThruHull Pod Adapter - Feelfree Kayaks J-2 Motors
ThruHull Pod Adapter – Feelfree Kayaks (J-2 Motors)

PRODUCT DESCRIPTION

No Drilling. No holes. No hassle!

The ThruHul Pod Adapter for Feelfree Kayaks clips into the pod opening of your Feelfree kayak in seconds.

The adapter comes with the original Feelfree pod, allowing you to store and quickly access your gear or personal items.

The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the pod and can continue to use it for its intended purpose as you motor in your FeelFree kayak.

This ThruHul Pod Adapter for Feelfree Kayaks also features a motor shield that protects the motor in case of a light impact.

Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.

FEATURES

  • Quick and easy installation
  • Works with FeelFree Lure, Moken, Dorado, Predador
  • Sealed to keep the pod dry
  • Weighs less than 4lbs
  • Original Feelfree Pod

INCLUDES

  • ThruHullPod Adapter for FeelFree Kayaks
  • Bixpy Propeller Housing with reduced width for a better fit

ADDITIONAL INFORMATION

  • Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components
  • Water use: Marine grade stainless steel components for salt water or fresh water use

INSTALLATION GUIDES

Click here for installation guides and videos.

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.

not rated $199.00 Add to cart
Transom Adapter J-2 Motors
Transom Adapter (J-2 Motors)

PRODUCT DESCRIPTION

With the Transom Adapter, you can attach your Bixpy Motor to virtually any watercraft with a flat vertical mounting surface in seconds. This includes most dinghies, some kayaks, personal pontoons and a variety of other watercraft. The aluminum pipe will adjust to accommodate virtually any depth to meet your needs.

This kit also includes a complete steering mechanism that will allow you to steer the motor for full control of your kayak.

 

FEATURES

  • Fits virtually any transom plate
  • Adjustable depth
  • Quick release disassembly
  • Adjustable trim
  • Super sturdy construction

INCLUDES

  • Transom WillFit™ Adapter
  • All hardware required to attach to dinghies, kayaks, personal pontoons and a variety of other watercraft
  • Tiller Steering Handle (2 sizes – 12″ and 24″ included)
  • One Rubber grip for tiller handle

ADDITIONAL INFORMATION

  • Attachment: Attaches to virtually any watercraft with a flat vertical mounting surface
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components
  • Water use: Marine grade stainless steel components for salt water or fresh water use
  • Length of horizontal blue pipe: 31 inches (79 cm)

INSTALLATION GUIDES 

Click here for installation guides and videos

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.

not rated $159.00 Add to cart
Universal Kayak Adapter J-2 Motors
Universal Kayak Adapter (J-2 Motors)

PRODUCT DESCRIPTION

With the Universal Kayak Adapter, you can attach your Bixpy J-2 Motor to virtually any kayak, canoe or small watercraft. The aluminum pipes will adjust to accommodate virtually any length and configuration, and the mechanism includes an ingenious adjustment arm to accommodate a wide variety of slopes in the back of various watercraft. 

As every kayak is slightly different in shape and configuration, you will have to do a little bit of installation with this adapter, but rest assured, this adapter ships complete with all the nuts and bolts you’ll need to get the job done. This is a more complex adapter, requiring higher levels of DIY ability, so it’s only recommended if none of our other Adapters fit your kayak and you’re comfortable taking on the task of installation or have access to a professional installer. 

 

INCLUDES

  • Universal Kayak & Canoe Adapter
  • All hardware required to attach to kayaks and canoes

ADDITIONAL INFORMATION

  • Adapter: Attaches to virtually any kayak or canoe with adjustable hardware
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components
  • Water use: Marine grade stainless steel components for salt water or fresh water use

INSTALLATION GUIDES 

Click here for installation guides and videos

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.

not rated $99.00 Add to cart
Universal Rudder Adapter J-2 Motors
Universal Rudder Adapter (J-2 Motors)

PRODUCT DESCRIPTION

The Vibe Bixpy-Ready Gravity Rudder is the first rudder in the market specifically designed to accept a motor as an option. The bottom portion of the rudder unscrews in seconds to allow you to attach your J-2 Motor directly onto the rudder.

The Vibe Bixpy-Ready Gravity Rudder offers a molded 10mm stainless steel pin that offers easy installation and not only fits all Vibe kayaks but can replace most other manufacturer rudders in seconds! It also offers a robust double hinged, 90° Slide & Stow mechanism that gets the rudder completely out of the water in a heartbeat!

The Vibe Bixpy-Ready Gravity Rudder also features a gravity driven locking mechanism that allows the rudder to lock into place when motorized in forward or reverse. However, since the locking only occurs with gravity, the rudder easily “unlocks” and pops up to protect your motor and rudder in shallow water. Steering your rudder can be done using your existing rudder steering system if you have one and if not, you can choose from a variety of options in our Steering Options.

FEATURES

  • Mounts into any standard rudder 10mm pin hole
  • Gravity deployment system
  • 90° quick Slide & Stow feature
  • Gravity “Lock-down” mechanism for reverse speeds
  • 18in. x 4in. rudder blade
  • Kick up feature for shallow water and hazards
  • Removable cap for mounting Bixpy Jet Motor

INCLUDES

  • Vibe Bixpy-Ready Gravity Rudder
  • Bixpy Clam Cleat
  • Pull up rope

INSTALLATION GUIDES 

Click here for installation guides and videos.

* Motors shown in pictures not included in adapter kits.

If you need to make a complete kit add the Bixpy Base Outboard Kit to Cart.

not rated $139.00 Add to cart
Bixpy Pole Steering Bracket 2
Bixpy Pole Steering Bracket

The Bixpy Pole Steering Bracket can be used with any of the Bixpy Adapters that offer a 1″ vertical pipe (the blue pipes).

not rated $69.00 Add to cart
J-2 Kare Kit
J-2 Motor Kare Kit

PRODUCT DESCRIPTION

The Kare Kit for the Bixpy J-2 Motor is the ideal emergency kit to always have on board.

It includes the Fine Grill Bixpy Propeller Guard, a spare propeller, a CR2032 Battery battery cell for your remote and a 5ml tube of multi-purpose di-electric grease to protect your connector.

INCLUDES

  • 1 PowerShroud™ Propeller Guard – Fine Grill
  • 1 Bixpy PowerShroud™ Propeller
  • 1 CR2032 – Outboard Remote Battery
  • 1 5ml tube of multi-purpose di-electric grease

INSTALLATION GUIDES 

Click here for installation of the Propeller Guard Grill
Click here to best practices on mating your connectors

 

* Propellers may be blue or charcoal gray depending on our inventory – both propellers are made of exactly the same material

not rated $29.99 Add to cart
BIXPY POD ADAPTER - BONAFIDE KAYAKS 1
Bixpy Pod Adapter – Bonafide Kayaks (J-1)

No Drilling. No holes. No hassle!

The Bixpy Pod Adapter for Bonafide kayaks clips into the Dry Pod opening of your Bonafide kayak in a matter of seconds.

The adapter comes with the original Bonafide Dry Pod, allowing you to store and quickly access your gear or personal items.

The Bixpy Jets mounts on the bottom with only a backing plate inside the pod so you lose no space in the Dry Pod and can continue to use it for its intended purpose as you motor in your Bonafide kayak.

The motor is protected by a shield on the front so it will not get damaged with a light impact.

Pair with the Bixpy Base Outboard Kit to make a complete set.

INCLUDES

  • Bixpy Pod Adapter
  • Wire to run to your Bixpy Outboard Power Pack
  • Installation card
  • Narrow thruster outlet.
not rated $229.00 Add to cart
Bixpy DIY Pod Adapter
Bixpy DIY POD Adapter

The Bixpy DIY Pod Adapter is for the do it yourselfer looking to install the Bixpy Jet on a Dry Pod or to the flat surface of virtually anything.

not rated $139.00 Add to cart
Flat Surface Bracket J-1 and J-2 Motors
Flat Surface Bracket (J-1 and J-2 Motors)

PRODUCT DESCRIPTION

The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!

This is a great tool for pod mounts on kayaks or a variety of other applications where you need to vertically attach the Bixpy Motor to a flat surface.

If you have a J-2 Motor, this adapter will simply attach directly to your J-2 motor. J-1 Motors will require a Standard Attachment to adapt to the motor before attaching this adapter.

not rated $19.99 Add to cart
bixpy diy adapter
Bixpy DIY (Do It Yourself) Adapter (J-1)

If your kayak has a rudder and you would like to motorize it, you can download a DIY rudder template and make your own motorized rudder with the Bixpy DIY Adapter.

Check out this instructional video on exactly how to do that in minutes. In this video, we install a Bixpy Jet to a rudder from a Viking Kayak. You can attach the Bixpy DIY  Rudder Adapter to virtually any kayak rudder using the same method. You can also use the same method to attach the jets to virtually any fin on any watercraft.

INCLUDES

  • Bixpy DIY Adapter
  • All hardware required to attach to kayaks and canoes
  • Wire to run to your Bixpy Outboard Power Pack
  • Instructions

not rated $99.00 Add to cart
bixpy power pole adapter
Bixpy Power Pole Adapter

The Bixpy Power Pole Adapter allows you to quickly and easily add a Bixpy Jet to your kayak using your standard Micro Power Pole adapter slot.

not rated $189.00 Add to cart
Bixpy Universal Rudder Adapter
Bixpy Universal Rudder Adapter (J-1)
One of the simplest, fastest and most efficient ways to use the Bixpy on a kayak is on the rudder of the kayak. However, not all kayaks have rudders and the ones that do, don’t always offer a robust enough rudder mount to run the motor well and without damaging the kayak.
The Bixpy Universal Rudder Adapter is designed to give you the option to mount a rudder on virtually any kayak. If your kayak already has a robust 10mm pin hole for a rudder, all you need is the Bixpy Universal Rudder Adapter. If your kayak doesn’t already have a 10mm pin holder for a rudder, you can purchase the Bixpy Gudgeon, which provides a super robust and adaptable 10mm rudder pin holder for your Bixpy Universal Rudder Adapter.
The Bixpy Universal Rudder Adapter features a pull cord, a kick up feature and “lock-down” for reverse speeds.
We also offer two options for steering your rudder, a hand steering option and a foot pedal option, each sold separately.
The following are also steering and mounting options:
  • Bixpy Gudgeon
  • Bixpy Simple Gudgeon
  • Bixpy Hand Steering System
  • Bixpy Foot Pedal Steering System

BIXPY PERFORMANCE

INCLUDES

  • Bixpy Universal Rudder Adapter
  • All hardware required to attach to kayaks and canoes
  • Wire to run to your Bixpy Outboard Power Pack
  • Instructions

not rated $139.00 Add to cart
Bixpy SUP Adapter US Fin Box
Bixpy SUP Fin Adapter (J-1)

If you already have your Bixpy Jet from another kit and would like to attach your motor to your standup paddle board, this is what you’ll need. Don’t forget, if you don’t have a Bixpy Outdoor Power Pack, you’ll need to get one of those as well.

INCLUDES

  • Bixpy SUP fin (Choose required version; US or Standard Fin Box)
  • All hardware required
  • Wire to run to your Bixpy Battery Box
  • Instructions
not rated Starting at: $119.00 Select options
Bixpy Gudgeon Mount
Bixpy Gudgeon Mount

The Bixpy Gudgeon Mount is designed to allow the mounting of a rudder with a 10mm pin onto most kayaks, canoes, small sailboats or whatever else you can dream up.

not rated $69.00 Add to cart
Bixpy Hobie Rudder Adapter
Bixpy Hobie® Rudder Adapter (J-1)

If you already have your Bixpy Jet from another kit and would like to use it in your Hobie kayaks and replace your rudder, this is what you’ll need. Don’t forget, if you don’t have a Bixpy Outdoor Battery Box, you’ll need to get one of those as well. Your battery pack comes with a remote control.

INCLUDES

  • Bixpy Hobie® Rudder Adapter
  • All hardware required to attach to kayaks and canoes
  • Wire to run to your Bixpy Battery Box
not rated $129.00 Add to cart
bixpy hobie miragedrive adapter
Bixpy Pedal Drive Adapter – Hobie® Mirage, Vibe X-Drive, Pelican, Lightening (J-1)

If you already have your Bixpy Jet from another kit and would like to use it in your Hobie kayaks and replace your kick pedals, this is what you’ll need. Don’t forget, if you don’t have a Bixpy Outdoor Battery Box, you’ll need to get one of those as well. Your battery pack comes with a remote control.

INCLUDES

  • Bixpy Pedal Adapter
  • All hardware required to attach to kayaks and canoes
  • Wire to run to your Bixpy Battery Box

FEATURES

The new design (2020 and onward) now fits more kayaks including all roto-molded Hobie® kayaks, Inflatable Hobie® kayaks, Vibe Kayaks, Pelican Kayaks and Lightening Kayaks. Please note that this adapter does not fit the new Hobie® MirageDrive 360.

not rated $169.00 Add to cart
Bixpy Universal Kayak & Canoe Adapter
Bixpy Universal Kayak & Canoe Adapter (J-1)

With the Bixpy Universal Kayak & Canoe Adapter, you can attach your Bixpy Jet to virtually any kayak, canoe or similar watercraft. The aluminum pipes will adjust to accommodate virtually any length, and the mechanism includes an ingenious adjustment arm to accommodate a wide variety of slopes in the back of various kayaks.  

As every kayak is slightly different in shape and configuration, you will have to do a little bit of installation with this adapter, but rest assured, the Bixpy Universal Kayak & Canoe Adapter comes complete with all the nuts and bolts you’ll need and complete instructions.

BIXPY PERFORMANCE

screen-shot-2018-09-28-at-12.14.54-pm-2.png

INCLUDES

  • Bixpy Universal Kayak & Canoe Adapter
  • All hardware required to attach to kayaks and canoes
  • Wire to run to your Bixpy Outboard Power Pack
  • Instructions sheets
not rated $139.00 Add to cart
Bixpy for Inflatables Adapter
Bixpy for Inflatables Adapter (J-1)

If you already have your Bixpy Jet from another kit and would like to attach your motor to your inflatable kayak, this is what you’ll need. Don’t forget, if you don’t have a Bixpy Outdoor Battery Box, you’ll need to get one of those as well. Your battery pack comes with a remote control.

INCLUDES

  • Bixpy Inflatable Adapter (For Inflatable Kayaks or iSUP’s that don’t have removable fin boxes)
  • All hardware required
  • Wire to run to your Bixpy Battery Box
not rated $119.00 Add to cart
Bixpy Simple Gudgeon Mount
Bixpy Simple Gudgeon Mount

The Bixpy Simple Gudgeon Mount is needed to mount our Universal Rudder Adapter to most kayaks with pre-tapped mounting holes with screw inserts found on the stern of the kayak (such as Wilderness System, Necky, Ocean Kayak, Emotion, and more).

not rated $24.99 Add to cart
Bixpy Universal Transom Adapter
Bixpy Universal Transom Adapter (J-1)

With the Bixpy Universal Transom Adapter, you can attach your Bixpy Jet to virtually any watercraft with a flat vertical mounting surface. This includes most dinghies, some kayaks, personal pontoons and a variety of other watercraft. The aluminum pipe will adjust to accommodate virtually any depth to meet your needs.

This kit also includes a complete steering mechanism that will allow you to steer the motor for full control of your kayak. The shaft holding the motor also features a “kick-up” mechanism that will allow the motor to release and swing if it hits bottom.

FEATURES

  • Fits visually any transom plate
  • Adjustable depth
  • Quick release disassembly
  • Adjustable trim
  • Super sturdy construction

INCLUDES

  • Bixpy Universal Transom Adapter
  • All hardware required to attach to dinghies, kayaks, personal pontoons and a variety of other watercraft
  • Wire to run to your Bixpy Battery Box
  • Tiller Steering Handle (2 sizes – 12″ and 24″ included)
  • One Rubber grip for tiller handle

 

not rated $189.00 Add to cart
Bixpy Extension Cable
Bixpy Extension Cable

The Bixpy Extension Cord allows you to place your Outboard Battery Pack further from your motor. If you would like to store your battery in the front hatch of your kayak or Standup Paddle Board or simply want the battery further from your motor, this is what you’ll need. Like any other extension cord, you can plug multiple cords together to achieve a desired length.

It is important to remember that extension cords do reduce the efficiency of the system, specially at higher speeds. So buy the shortest cable you need for your purpose. There is roughly a 1% to 4% power loss with a 4.5 ft extension cord and a 2% to 8% power loss with the 9 ft cable.

not rated Starting at: $25.00 Select options
Bixpy Hand Steering Kit
Bixpy Hand Steering Kit

The Bixpy Hand Steering Kit is a compact system which provides steering for the Universal Kayak Adapter and the Rudder Adapter. This steering system can also be used for non-Bixpy applications.

not rated $69.00 Add to cart
Sold
Bixpy 12V Auxiliary Cable
Bixpy 12V Auxiliary Cable

Expected release date is March 2017

Your Bixpy Outboard Battery Box has a 12V outlet for you to plug in your fish finder or other 12V electronics. This cable allows you to do just that and keep everything water tight.

INCLUDES

  • Waterproof connector with cap
  • 6′ double core cable
  • Bare positive(red)/negative(black) tips
not rated $12.99 Read more
Bixpy Foot Pedal Steering System
Bixpy Foot Pedal Steering System

The Bixpy Foot Pedal Steering System is a simple to use and robust foot pedal system which can provide steering for most Bixpy Adpaters, including the Universal Kayak Adapter, Rudder Adapter, Transom Adapter, Power Pole Adapter.

not rated $79.00 Add to cart
Bixpy Tiller Steering Handle
Bixpy Tiller Steering Handle

The Bixpy Tiller Steering Handle is a universal addition to any Bixpy adapter with a vertical down pipe (the blue pipes). You can easily bolt this steering adapter to your existing Bixpy Steering Wing and use it to steer your Bixpy Jet motor setup.

not rated $59.00 Add to cart
5V USB Charger Cable
5V USB Charger Cable

Another great feature of your Bixpy Outboard Battery box is this handy USB charger port. It is a great feature for when your phone or tablet is running low on battery whether on water or land.

Keep in mind, the USB port is NOT water proof and you should keep it dry at all times and the output is only 1 amp, which means slow charges. This is to preserve your battery for use with your Bixpy Jet and primarily serves as an emergency charger.

INCLUDES

  • Waterproof connector with cap
  • 6″ USB cable
  • Connector cap for when not in use
not rated $16.99 Add to cart
Bixpy J-1 Kare Kit
Bixpy J-1 Kare Kit

The Bixpy J-1 Kare Kit is the ideal emergency kit to always have on board.

It includes the Fine Grill Bixpy PowerShroud™ Propeller Guard, a spare propeller, a front nose clip and 5 packs of multi-purpose di-electric grease.

not rated $29.99 Add to cart
Bixpy J-1 Weed Guard
Bixpy J-1 Weed Guard

The Bixpy J-1 Weed Guard is the perfect accessory if you use your Bixpy Jet in places where excess seaweed, small pebbles and other debris are present, which can damage the propeller housing and/or the propeller.

not rated $14.99 Add to cart